Langues

Laboratoire de recherche
UMR 6602 - UCA/CNRS/SIGMA

Annuaire

Balandraud Xavier


Photo
Fonction : Enseignant chercheur (Permanent Ip)
Axe : Mms
Thème : Ms
Téléphone : +33473288089
Fax : +33 4 7328 8027



Publications associées :
115 publication trouvées


2017
ACL
BEITONE C., BALANDRAUD X., DELPUEYO D., GREDIAC M.
Heat source reconstruction from noisy temperature fields using a gradient anisotropic diffusion filter



JONGCHANSITTO P., PREECHAWUTTIPONG I., BALANDRAUD X., GREDIAC M.
Numerical investigation of the influence of particle size and particle number ratios on texture and force transmission in binary granular composites



ACTI
DELPUEYO D., BALANDRAUD X., GREDIAC M., STANCIU S., CIMPOESU N.
Measurement of mechanical dissipation in SMAs by infrared thermography



2016
ACL
DELPUEYO D., BALANDRAUD X., GREDIAC M.
Calorimetric signature of the Portevin–Le Châtelier effect in an aluminum alloy from infrared thermography measurements and heat source reconstruction



MEKAOUCHE A., CHAPELLE F., BALANDRAUD X.
Using shape memory alloys to obtain variable compliance maps of a flexible structure: concept and modeling



OS
MEKAOUCHE A., CHAPELLE F., BALANDRAUD X.
Research in Interactive Design (Vol. 4)



ACTI
BEITONE C., BALANDRAUD X., GREDIAC M., DELPUEYO D., TILMANT C., CHAUSSE F.
Applying a GAD filter to calculate heat sources from noisy temperature fields



DELPUEYO D., BALANDRAUD X., GREDIAC M.
Applying infrared thermography and heat source reconstruction for the analysis of the Portevin-Le Chatelier effect in an aluminum alloy



YUAN H., BALANDRAUD X., FAUROUX J., CHAPELLE F.
Compliant Rotary Actuator Driven by Shape Memory Alloy



2015
ACL
TRAN H., BALANDRAUD X., DESTREBECQ J.
Curvature effect on the mechanical behaviour of a martensitic shape-memory-alloy wire for applications in civil engineering



MEKAOUCHE A., CHAPELLE F., BALANDRAUD X.
FEM-based generation of stiffness maps



RICARDOSAMACAMARTINEZ J., TOUSSAINT E., BALANDRAUD X., LECAM J., BERGHEZAN D.
Heat and strain measurements at the crack tip of filled rubber under cyclic loadings using full-field techniques



TRAN H., BALANDRAUD X., DESTREBECQ J.
Improvement of the mechanical performances of concrete cylinders confined actively or passively by means of SMA wires



BALANDRAUD X., BARRERA N., BISCARI P., GREDIAC M., ZANZOTTO G.
Strain intermittency in shape-memory alloys



CHAIAMARIT C., BALANDRAUD X., PREECHAWUTTIPONG I., GREDIAC M.
Stress network analysis of 2D non-cohesive polydisperse granular materials using infrared thermography



LECAM J., RICARDOSAMACAMARTINEZ J., BALANDRAUD X., TOUSSAINT E., CAILLARD J.
Thermomechanical Analysis of the Singular Behavior of Rubber: Entropic Elasticity, Reinforcement by Fillers, Strain-Induced Crystallization and the Mullins Effect



ACTI
R.SAMACAMARTINEZ J., BALANDRAUD X., TOUSSAINT E., LECAM J., BERGHEZAN D.
Characterization of heat sources in the crack tip zone in stretched NR and SBR rubbers



JONGCHANSITTO P., BALANDRAUD X., GREDIAC M., PREECHAWUTTIPONG I.
Measurement of stress network in granular materials from infrared measurement



LECAM J., R.SAMACAMARTINEZ J., BALANDRAUD X., TOUSSAINT E., CAILLARD J.
Revisiting the mechanisms involved in rubber deformation using experimental thermomechanics



BARRERA N., BALANDRAUD X., GREDIAC M., BISCARI P., ZANZOTTO G.
Study of phase transformation intermittency in S.M.A. using the grid method



R.SAMACAMARTINEZ J., LECAM J., BALANDRAUD X., TOUSSAINT E., CAILLARD J.
Thermal and calorific effects accompanying the stress softening



ACTN
WAIBAYE A., BALANDRAUD X., DESTREBECQ J.
Création de structures à précontrainte adaptative à base d'alliages à mémoire de forme



MEKAOUCHE A., CHAPELLE F., BALANDRAUD X.
Obtention de rigidité variable d’une structure robotique par l’utilisation d’un alliage à mémoire de forme



2014
ACL
BUBULINCA C., BALANDRAUD X., GREDIAC M., STANCIU S., ABRUDEANU M.
Characterization of the mechanical dissipation in shape-memory alloys during stress-induced phase transformation



ROBIN E., LECAM J., BALANDRAUD X., TOUSSAINT E., BRILLAND L.
First steps towards the thermomechanical characterization of chalcogenide glass using quantitative infrared thermography



RICARDOSAMACAMARTINEZ J., LECAM J., BALANDRAUD X., TOUSSAINT E., CAILLARD J.
New elements concerning the Mullins effect: a thermomechanical analysis



BALANDRAUD X., LECAM J.
Some specific features and consequences of the thermal response of rubber under cyclic mechanical loading



RICARDOSAMACAMARTINEZ J., BALANDRAUD X., TOUSSAINT E., LECAM J., BERGHEZAN D.
Thermomechanical analysis of the crack tip zone in stretched crystallizable natural rubber by using infrared thermography and digital image correlation



JONGCHANSITTO P., BALANDRAUD X., GREDIAC M., BEITONE C., PREECHAWUTTIPONG I.
Using infrared thermography to study hydrostatic stress networks in granular materials



ACTI
MEKAOUCHE A., CHAPELLE F., BALANDRAUD X.
Identification of material and joint properties based on the 3D mapping of the Quattro static stiffness



JONGCHANSITTO P., PREECHAWUTTIPONG I., BALANDRAUD X., GREDIAC M., JONGCHANSITTO A.
Numerical study of the influence of the particle number on the granular texture in 2D composite granular media



ABRUDEANU M., PONTHIAUX P., PIERREMILLET J., GABRIELAPLAIASU A., BALANDRAUD X., GREDIAC M., HUEZ J., STANCIU S., RIZEA V., MAGDALENADICU M.
Romanian-French Collaboration for Master and Doctoral Studies in "Materials Engineering"



JONGCHANSITTO P., BALANDRAUD X., PREECHAWUTTIPONG I., GREDIAC M.
Thermoelastic stress analysis of composite granular materials



INV
BALANDRAUD X., DESTREBECQ J.
On the use of shape memory alloys for smart engineering applications (keynote paper)



COM
ROBIN E., LECAM J., BALANDRAUD X., TOUSSAINT E.
A thermomechanical study of soda lime glass



LECAM J., SAMACAMARTINEZ J., BALANDRAUD X., TOUSSAINT E.
New insights in experimental thermomechanics of rubber



LECAM J., ERIC R., BALANDRAUD X., TOUSSAINT E.
New insights in the thermomechanical characterization of chalcogenide glass using quantitative infrared thermography



ROBIN E., LECAM J., BALANDRAUD X., TOUSSAINT E., BRILLANT L.
Thermal stress analysis applied to chalcogenide glass



SAMACAMARTINEZ J., BALANDRAUD X., TOUSSAINT E., LECAM J., BERGHEZAN D.
Thermomechanical analysis of rubber specimens in the crack tip zone using full-field measurements



2013
ACL
SAMACAMARTINEZ J., LECAM J., BALANDRAUD X., TOUSSAINT E., CAILLARD J.
Filler effects on the thermomechanical response of stretched rubbers



DELPUEYO D., BALANDRAUD X., GREDIAC M.
Heat source calculation from noisy temperature fields using an optimized derivative Gaussian filter



SAMACAMARTINEZ J., LECAM J., BALANDRAUD X., TOUSSAINT E., CAILLARD J.
Mechanisms of deformation in crystallizable natural rubber. Part 1: thermal characterization



SAMACAMARTINEZ J., LECAM J., BALANDRAUD X., TOUSSAINT E., CAILLARD J.
Mechanisms of deformation in crystallizable natural rubber. Part 2: quantitative calorimetric analysis



BUBULINCA C., BALANDRAUD X., DELPUEYO D., GREDIAC M., STANCIU S., ABRUDEANU M., PLAIASU G., DICU M., NITU E.
Study of a monocrystalline Cu-Al-Ni shape memory alloy by infrared thermography



ACTI
BUBULINCA C., BALANDRAUD X., GREDIAC M., STANCIU S., ABRUDEANU M.
A new method to determinate phase transformation in shape memory alloys: infrared thermography



BUBULINCA C., BALANDRAUD X., GREDIAC M., STANCIU S., ABRUDEANU M.
Applying infrared thermography to characterize the mechanical dissipation in Cu-Zn-Al shape-memory alloys exhibiting various chemical compositions



SAMACAMARTINEZ J., LECAM J., BALANDRAUD X., TOUSSAINT E., CAILLARD J.
Characterization of heat sources due to deformation in unfilled natural rubber



CHAIAMARIT C., BALANDRAUD X., GREDIAC M., PREECHAWUTTIPONG I.
Experimental evidence of stress network in a 2D granular material under confined compression by infrared thermography



SAMACAMARTINEZ J., LECAM J., BALANDRAUD X., TOUSSAINT E., CAILLARD J.
Filler effects on the thermomechanical response of stretched rubbers



DELPUEYO D., BALANDRAUD X., GREDIAC M.
Heat source calculation from noisy temperature fields using a derivative Gaussian filter



SAMACAMARTINEZ J., TOUSSAINT E., BALANDRAUD X., LECAM J.
Microcalorimetry at the crack tip of rubber



SAMACAMARTINEZ J., LECAM J., BALANDRAUD X., TOUSSAINT E., CAILLARD J.
Thermal effects accompanying the deformation of natural rubber



BALANDRAUD X., LECAM J.
Thermal response of hyperelastic materials under cyclic loading conditions: specificities and consequences for fatigue



LECAM J., SAMACAMARTINEZ J., BALANDRAUD X., TOUSSAINT E., CAILLARD J.
Thermomechanical analysis of stretched rubbers



ACTN
TRAN H., WAIBAYE A., BALANDRAUD X., DESTREBECQ J.
Création de structures actives à l’aide d’alliages à mémoire de forme pour des applications dans le champ de la mobilité



BETENEEBANDA F., BALANDRAUD X., ATANGANAATEBA J., AYINAOHANDJ L., BEAKOU A.
Etude du comportement thermique du plâtre renforcé de fibres végétales - Thermal analysis of natural fibres reinforced plaster



COM
SAMACAMARTINEZ J., LECAM J., BALANDRAUD X., TOUSSAINT E., CAILLARD J.
Thermal and calorimetric evolutions of natural rubbers under cyclic loadings



2012
ACL
TOUSSAINT E., BALANDRAUD X., LECAM J., GREDIAC M.
Combining displacement, strain, temperature and heat source fields to investigate the thermomechanical response of an elastomeric specimen subjected to large deformations



DELPUEYO D., GREDIAC M., BALANDRAUD X., BADULESCU C.
Investigation of martensitic microstructures in a monocrystalline Cu-Al-Be shape memory alloy with the grid method and infrared thermography



ACTI
TOUSSAINT E., BALANDRAUD X., LECAM J., GREDIAC M.
Application of full-field measurements to analyse the thermomechanical response of a three-branch rubber



ACTN
TRAN H., BALANDRAUD X., DESTREBECQ J.
Confinement actif de cylindres en béton grâce à des fils d'AMF afin d'améliorer leurs performances mécaniques



2011
ACL
DELPUEYO D., BALANDRAUD X., GREDIAC M.
Applying infrared thermography to analyse martensitic microstructures in a Cu-Al-Be shape-memory alloy subjected to a cyclic loading



BADULESCU C., GREDIAC M., HADDADI M., MATHIAS J., BALANDRAUD X., TRAN H.
Applying the grid method and infrared thermography to investigate plastic deformation in aluminium multicrystal



TRAN H., BALANDRAUD X., DESTREBECQ J.
Recovery stresses in SMA wires for civil engineering applications: experimental analysis and thermomechanical modelling



ACLN
TRAN H., DEBSKA A., BALANDRAUD X., DESTREBECQ J.
Use of shape memory alloy wires for the creation of prestress states in concrete beams



ACTI
DEBSKA A., BALANDRAUD X., GWOZDZIEWICZ P., DESTREBECQ J., SERUGA A.
An experimental study of the use of shape memory alloy for the prestressing of small scale concrete beams



TRAN H., ELHAJJAR M., BALANDRAUD X., DESTREBECQ J.
Analysis of stress creation in small scale concrete beams by means of shape memory alloy wires



TRAN H., ELHAJJAR M., BALANDRAUD X., DESTREBECQ J.
Analytical model of SMA thermomechanical behaviour for applications in civil engineering



BALANDRAUD X., TOUSSAINT E., LECAM J., GREDIAC M., BEHNKE R., KALISKE M.
Application of full-field measurements and numerical simulations to analyze the thermo-mechanical response of a three-branch rubber specimen



PROMMA N., RAKA B., GREDIAC M., TOUSSAINT E., LECAM J., BALANDRAUD X., HILD F.
Processing heterogeneous strain fields with the virtual fields method: a new route for the mechanical characterization of elastomeric materials



ACTN
DELPUEYO D., BALANDRAUD X., GREDIAC M., BADULESCU C.
Etude de la transition de phase d’un monocristal d’AMF en Cu-Al-Be par techniques de mesures de champs



TRAN H., BALANDRAUD X., DESTREBECQ J.
Influence de la courbure d'un fil en AMF sur son comportement en traction dans une perspective de confinement de composants en béton



INV
DESTREBECQ J., BALANDRAUD X.
New results on the use of shape memory alloys for stress achievements in concrete components



COM
DELPUEYO D., BALANDRAUD X., GREDIAC M., BADULESCU C.
Experimental evidence of phase transformations in a Cu-Al-Be S.M.A. monocrystalline tensile specimen using full-field measurement techniques



2010
ACL
BALANDRAUD X., DELPUEYO D., GREDIAC M., ZANZOTTO G.
Almost compatible microstructures in shape memory alloys



BALANDRAUD X., ZHOU G., GREDIAC M., TESSIERDOYEN N.
Experimental evidence of thermal effects in multiphase ceramic specimens subjected to cyclic loading



OS
DESTREBECQ J., BALANDRAUD X.
Advanced Structured Materials-Materials with complex behaviour



ACLN
TRAN H., DEBSKA A., BALANDRAUD X., DESTREBECQ J.
Utilisation de fils en alliage à mémoire de forme pour la création de précontraintes dans des poutrelles en béton



ACTI
BADULESCU C., GREDIAC M., MATHIAS J., BALANDRAUD X., HADDADI H.
Investigating an aluminum multi-crystal with full-field measurement techniques



DELPUEYO D., BALANDRAUD X., GREDIAC M.
Thermoelastic analysis of copper-based monocristalline shape-memory alloys



ACTN
TRAN H., DEBSKA A., BALANDRAUD X., DESTREBECQ J.
Utilisation de fils d'AMF pour la création de précontraintes dans des structures en béton



INV
BALANDRAUD X., LECAM J.
Heat source calculation at the crack tip of rubber specimen from infrared thermography measurement



AFF
TRAN H., JARNO L., BALANDRAUD X., DESTREBECQ J.
Recovery stresses in SMA wires for civil engineering applications: experimental analysis and thermomechanical modelling



2009
ACL
PROMMA N., RAKA B., GREDIAC M., TOUSSAINT E., LECAM J., BALANDRAUD X., HILD F.
Application of the virtual fields method to mechanical characterization of elastomeric materials



PASTOR M., BALANDRAUD X., ROBERT J., GREDIAC M.
Lifetime prediction of aluminium structures reinforced with composite patches



POTTIER T., MOUTRILLE M., LECAM J., BALANDRAUD X., GREDIAC M.
Study on the use of motion compensation technique to determine heat sources. Application to large deformations on cracked rubber specimens



MOUTRILLE M., DERRIEN K., BAPTISTE D., BALANDRAUD X., GREDIAC M.
Through-thickness strain field measurement in a composite/aluminium adhesive joint.



ACTI
LECAM J., BALANDRAUD X., GREDIAC M., MOUTRILLE M., POTTIER T.
Applying infrared thermography to determine heat sources at the crack tip of rubber specimens



ACTN
DELPUEYO D., BALANDRAUD X., GREDIAC M.
Etude par thermographie infrarouge de microstructures martensitiques dans des monocristaux d'alliages à mémoire de forme



COM
DESTREBECQ J., BALANDRAUD X., AMIOUR S., DEBSKA A.
Investigation in the use of shape-memory alloy wires to create prestressed states in concrete specimens



2008
ACL
PASTOR M., BALANDRAUD X., GREDIAC M., ROBERT J.
Applying infrared thermography to study the heating of 2024-T3 aluminium specimens under fatigue loading



MOUTRILLE M., BALANDRAUD X., GREDIAC M., DERRIEN K., BAPTISTE D.
Applying thermoelasticity to study stress relief and crack propagation in aluminium specimens patched with composite material



MATHIAS J., GREDIAC M., BALANDRAUD X.
Design of optimized patches to reinforce damaged wings



PASTOR M., BALANDRAUD X., GREDIAC M., ROBERT J.
On the fatigue response of aluminium specimens reinforced with carbon-epoxy patches



COM
POTTIER T., MOUTRILLE M., BALANDRAUD X., LECAM J., GREDIAC M.
Applying infrared thermography to characterize cracked rubber specimens subjected to cyclic loading



PROMMA N., TOUSSAINT E., BALANDRAUD X., LECAM J., GREDIAC M., RAKA B.
Characterization of elastomeric materials with full-field measurements



2007
ACL
BALANDRAUD X., ZANZOTTO G.
Stressed microstructures in thermally induced M9R-M18R martensites



ACTI
BALANDRAUD X., LECAM J., MOUTRILLE M., PASTOR M., ROBERT J.
Analyse thermographique sous chargement cyclique : exemple d'applications aux aluminium



MOUTRILLE M., BALANDRAUD X., GREDIAC M., BAPTISTE D., DERRIEN K.
Experimental study of the stress relief in pached aluminium specimens



PASTOR M., BALANDRAUD X., ROBERT J., GREDIAC M.
Fatigue lifetime prediction of aeronautical components



PASTOR M., BALANDRAUD X., ROBERT J., GREDIAC M.
Fatigue properties of 2024-T3 aluminium specimens reinforced with composite patches



ACTN
PROMMA N., TOUSSAINT E., BALANDRAUD X., GREDIAC M.
Application de la méthode des champs virtuels en grandes déformations pour identifier des paramètres matériaux à partir de mesures de champs cinématiques : principe et simulation



PROMMA N., BALANDRAUD X., TOUSSAINT E.
Application de la méthode des champs virtuels pour l'identification de paramètres matériaux en grandes déformations



MOUTRILLE M., BALANDRAUD X., GREDIAC M., DERRIEN K., BAPTISTE D.
Application de la thermographie infrarouge à l'étude de la diminution de contrainte dans une éprouvette renforcée par patch composite



PASTOR M., BALANDRAUD X., GREDIAC M., ROBERT J.
Etude du comportement en fatigue d'éprouvettes renforcées par patchs composites



2006
ACL
MATHIAS J., BALANDRAUD X., GREDIAC M.
Applying a genetic algorithm to the optimization of composite patches



MATHIAS J., BALANDRAUD X., GREDIAC M.
Experimental investigation of composite patches with a full-field measurement method



MATHIAS J., BALANDRAUD X., GREDIAC M.
Influence de la séquence d'empilement et de la géométrie d�un patch composite sur l'efficacité du renforcement d'une structure métallique trouée



MATHIAS J., GREDIAC M., BALANDRAUD X.
On the bidirectional stress distribution in rectangular bonded composite patches



ACTI
PASTOR M., BALANDRAUD X., ROBERT J., GREDIAC M.
Damage analysis of 2024-T3 aluminium specimens using infrared thermography



MATHIAS J., BALANDRAUD X., GREDIAC M.
Experimental evidence of the load transfer zone in curved composite patches using the grid method



MATHIAS J., BALANDRAUD X., GREDIAC M.
Experimental study of composite patches subjected to a thermal loading



PASTOR M., BALANDRAUD X., GREDIAC M., ROBERT J.
Life extension of 2024-T3 aluminium specimens reinforced by composite patches



MOUTRILLE M., DERRIEN D., BAPTISTE D., GREDIAC M., BALANDRAUD X.
Through-thickness strain field measurement in a composite/aluminium adhesive joint



MOUTRILLE M., DERRIEN K., BAPTISTE D., BALANDRAUD X., GREDIAC M.
Through-thickness strain field measurement in an adhesive joint between composite and aluminium





<-- retour à l'annuaire