Langues

Laboratoire de recherche
UMR 6602 - UCA/CNRS/SIGMA

Annuaire

Duc Emmanuel


Photo
Fonction : Enseignant chercheur (Permanent Ip)
Axe : Mms
Thème : Mmsi
Téléphone : +33
Fax : +33 4 7328 8027



Publications associées :
86 publication trouvées


2016
ACL
PRAT D., FROMENTIN G., POULACHON G., DUC E.
Modeling and Analysis of 5 Axis Milling Configurations and Titanium Alloy Surface Topography



ACTI
REBERGUE G., BLAYSAT B., CHANAL H., DUC E.
DIC in machining environment,constraints and benefits



2015
ACL
WAGNER V., VISSIO A., DUC E., PIJOLAT3 M.
Relationship between cutting conditions and chips morphology during milling of aluminium Al-2050



CHARDON G., CHANAL H., DUC E., GARNIER T.
Study of surface finish of fiber-reinforced composite molds



ACTI
KISWANTO G., HENDRIKO H., DUC E.
An Implementation of Analytical Boundary Simulation Method on Cutting Force Prediction Model in Five-axis Milling



ACTN
FORTUNET C., DUC E., CHANAL H., DURIEUX S.
Design for manufacturing application à la conception de pièces aéronautiques



GUTIERREZ J., CHANAL H., DUC E., DURIEUX S.
Influence du mécanisme de type parallélogramme sur la précision géométrique d'un robot 6 axes



2014
ACL
KISWANTO G., HENDRIKO H., DUC E.
An analytical method for obtaining cutter workpiece engagement during a semi-finish in five-axis milling



KISWANTO G., HENDRIKO H., DUC E.
Analytical Method for obtaining cut geometry of helical toroidal cutter during semi-finish in 5-axis milling



WAGNER V., DUC E.
Study of Ti-1023 milling with toroidal tool



ACTI
TROUVAIN G., GAGNOL V., DUC E., SANCHO J.
Mass-Spring Parameters Definition in 2D for Simulation



2013
ACL
PATELOUP S., CHANAL H., DUC E.
Process parameter definition with respect to the behaviour of complex kinematic machine tools



BEAUCAIRE P., GAYTON N., YVESDANTAN J., DUC E.
Statistical tolerance analysis of a mechanism with gaps based on system reliability methods



BEAUCAIRE P., GAYTON N., YVESDANTAN J., DUC E.
Statistical tolerance analysis of over-constrained mechanism using system reliability methods



ACTI
ENDRIKO H., DUC E., KISWANTO G.
Analytical Cut Geometry Prediction For Free Form Surface During Semi-Finish Milling



KISWANTO G., ENDRIKO H., DUC E.
Analytical Method for Obtaining Cutter Workpiece Engagement in Five-Axis Milling. - Part 3: Flat-End Cutter and Free-Form Workpiece Surface



ACTN
TROUVAIN G., GAGNOL V., DUC E., SANCHO J.
Fast Deformation Method for a 2D Shape



2012
ACL
PATELOUP S., CHANAL H., DUC E.
Process definition of preformed part machining for taking benefit of Parallel Kinematic Machine-tools kinematic performances



BEAUCAIRE P., GAYTON N., DUC E., LEMAIRE M., YVESDANTAN J.
Statistical tolerance analysis of an hyperstatic lechanism with gaps using system reliability methods



ACTI
CHANAL H., PACCOT F., DUC E.
Sensitivity analysis of an overconstrained parallel structure machine tool, the Tripteor X7



BEAUCAIRE P., GAYTON N., YVESDANTAN J., DUC E., LEMAIRE M.
Statistical tolerance analysis of a mechanism with gaps based on system reliability methods.



2011
ACL
PATELOUP S., CHANAL H., DUC E.
A study of the performances of parallel and serial 5 axis machine-tools for aeronautics part machining



GAYTON N., BEAUCAIRE P., BOURINET J., DUC E., LEMAIRE M., GAUVRIT L.
APTA: Advanced Probability - based Tolerance Analysis of products



CHAVESJACOB J., POULACHON G., DUC E., GEFFROY C.
Design For Manufacturing applied to turbomachine components



BRETEAU T., DAMAY T., DUC E., HASCOET J.
Design for manufacturing with tool paths adapted to marine propeller



CHAVESJACOB J., POULACHON G., DUC E.
Optimal strategy for finishing impeller blades using 5-axis machining



DEBOUT P., CHANAL H., DUC E.
Tool path smoothing of a redundant machine tool: application to Automated Fiber Placement



ACLN
GAYTON N., BEAUCAIRE P., DUC E., LEMAIRE M.
The APTA method for the tolerance analysis of products - comparison of capability-based tolerance and inertial tolerance



ACTI
KISWANTO G., DUC E.
An approach for Geometric Modeling of Cutter Workpiece Engagement in Five-axis Milling



PRAT D., FROMENTIN G., POULACHON G., DUC E.
Analyse des configurations d'usinage en 5 axes à la fraise hémisphérique



THE
PATELOUP S., DUC E.
Modélisations et aptitudes à l’emploi des machines-outils à structure parallèle : vers une optimisation dirigée du processus



CHARDON G., DUC E.
Usinage de moules en matériaux composites, expression des contraintes liées au procédé



2010
ACL
PATELOUP V., DUC E., RAY P.
Bspline approximation of circle arc and straight line for pocket machining



OS
TOURNIER C., DUC E., GAGNOL V., CHANAL H., PACCOT F., A.
Usinage à Grande Vitesse : technologies, modélisations, trajectoires



ACLN
PATELOUP S., CHANAL H., DUC E.
Geometric and kinematic modelling of a new Parallel Kinematic Machine Tool: the Tripteor X7 designed by PCI



ACTI
GAYTON N., BEAUCAIRE P., DUC E., LEMAIRE M.
Application des méthodes fiabilistes au tolérancement statistique des systèmes mécaniques



PATELOUP S., CHANAL H., DUC E.
Comparison of PKM and SKM performances for aeronautics part machining



CHARDON G., CHANAL H., DUC E.
Finishing process of mold in composites material with an abrasive diamond tool



PATELOUP S., CHANAL H., DUC E.
Productivity improvement for preformed part machining with PKM



CHARDON G., CHANAL H., DUC E.
Surface finishing of mold in fiber reinforced composites with a ball end cutter tool : detection of a minimum reachable value of roughness



ACTN
PATELOUP S., CHANAL H., DUC E.
Etude des performances de machines-outils 5 axes à structure parallèle et sérielle pour l'usinage d'une pièce aéronautique



RAUCH M., DUC E., HASCOET J.
Génération de trajectoires sous contraintes de process : Application à l'usinage trocho\¨Idal



CHAVESJACOB J., POULACHON G., DUC E.
Usinage 5-axes de composants de turbomachine



MARTY D., MASSE F., DUC E.
Usinage aéronautique : évaluation des gains potentiels liés à l'emploi de broches 100 kW



CHARDON G., CHANAL H., DUC E.
Usinage de finition de moules en matériaux composites avec outil hémisphérique : Détection d'un seuil de rugosité accessible



2009
ACL
RAUCH M., DUC E., HASCOET J.
Improving trochoidal tool paths generation and implementation using process constraints modelling



CHAVESJACOB J., POULACHON G., DUC E.
New approach to 5-axis flank milling of free-form surfaces: Computation of adapted tool shape



CHANAL H., DUC E., YVESHASCOET J., RAY P.
Reduction of a parallel kinematics machine tool inverse kinematics model with regard to machining behaviour



ACTI
CHAVES J., POULACHON G., DUC E.
5-Axis Machining of Complex Blades: Strategies Optimization



GUILLAUME C., ALGAZZE S., DUC E.
Economic feasibility of wind turbines for individual households



CHARDON G., CHANAL H., DUC E., GAZEL A.
Etude prospective sur l'usinage de forme de matériaux composites



PATELOUP S., CHANAL H., DUC E.
Geometric and kinematic modelling of a new Parallel Kinematic Machine Tool: the Tripteor X7 designed by PCI



DEBOUT P., CASTAGNETTI C., CHANAL H., DUC E.
Improving machine tool kinematic behavior by smoothing tool paths



PATELOUP S., BONNEMAINS T., CHANAL H., BOUZGARROU B., DUC E., RAY P.
Machining performance optimization of parallel kinematic machines tool with regard to their anisotropic behaviour



PATELOUP S., CHANAL H., DUC E.
Optimisation cinématique des machines outils à structure parallèle lors des trajets hors matière



CHARDON G., CHANAL H., GAZEL A., DUC E.
Study on the Surface Machining of Fiber-reinforced Composites



GAYTON N., DUC E., LEMAIRE M.
The use of probabilistic approach for the tolerancing management in design process



GAYTON N., DUC E., LEMAIRE M.
The use of probabilistic approach for the tolerancing management in design process



OV
CHANAL H., DUC E., HASCOIT ,.
Technologie & Formation - n�141



2008
ACL
CASTAGNETTI C., DUC E., RAY P.
Influence of adapted five-axis tool paths on the machine behaviour



CASTAGNETTI C., DUC E., RAY P.
The Domain of Admissible Orientation concept: A new method for five-axis tool path optimisation



ACTI
GAYTON N., GAUVRIT L., DUC E., LEMAIRE M.
A Methodology to assess the out tolerance probability with linear or non linear functional requirements



DEBOUT P., CHANAL H., DUC E.
Calcul de trajectoires d'évidement de poches avec contrôle de l'engagement radial



CHAVESJACOB J., POULACHON G., DUC E.
Innovative approach for 5-axis flank milling of non-developable ruled surfaces: development of half-barrel cutters



CHAVESJACOB J., POULACHON G., DUC E.
New method for the flank milling of ruled-surfaces



CASTAGNETTI C., DUC E., RAY P.
Optimisation de trajets outils 5 axes utilisant le concept du domaine d'orientation admissible



OV
DUC E., HASCOIT ,.
Technologie et Formation - No 135



PATELOUP V., DUC E.
Technologie et Formation - No 136



CASTAGNETTI C., DUC E., HASCOIT ,.
Technologie et Formation - No 139



2007
ACL
CHANAL H., DUC E., RAY P., YVESHASCOET J.
A new approach for the geometrical calibration of parallel kinematics machines tools based on the machining of a dedicated part



PATELOUP V., CHANAL H., DUC E., RAY P.
HSM tool path evaluation proposition of performance criteria



CHANAL H., RAUCH M., DUC E., YVESHASCOET J., RAY P.
Identification géométrique des machines outils à structure parallèle : proposition d’une méthode basée sur l’usinage d’une pièce



OS
CHANAL H., DUC E., RAY P.
Advances in Integrated Design and Manufacturing in Mechanical Engineering II



CHANAL H., DUC E., RAY P.
Calibration accuracy of a parallel structure machine tool with respect to machined part quality in Advances in Integrated Design and Manufacturing in Mechanical Engineering II



ACLN
PATELOUP V., CHANAL H., DUC E., RAY P.
Performance evaluation of tool path for HSM pocketing



ACTI
CASTAGNETTI C., DUC E., RAY P.
Influence of optimised five-axis tool paths on the machine behaviour



2006
ACL
CHANAL H., DUC E., RAY P.
A study of the impact of machine tool structure on machining processes



PATELOUP V., CHANAL H., DUC E., RAY P.
HSM adapted tool path calculation, for pocketing



ACTI
DUC E., SEGURA S., PATELOUP V., RAZIER T.
Adaptation des parcours d'usinage au processus de fabrication UGV, Cas de l'ébauche des Moules



CHANAL H., DUC E., RAY P., YVESHASCOET J.
Calibration accuracy of a parallel structure machine tool with respect to machined part quality



CHANAL H., DUC E., RAY P., HASCOET J.
Design of a dedicated machined part for calibrating parallel kinematics machine tool



PATELOUP V., CHANAL H., DUC E., RAY P.
HSM pocketing tool path evaluation proposition of performance criteria



CHANAL H., RAUCH M., DUC E., HASCOET J., RAY P.
Identification géométrique des machines outils à structure parallèle, proposition d'une méthode basée sur l'usinage d'une pièce



PATELOUP V., CHANAL H., DUC E., RAY P.
Performance evaluation of tool path for HSM pocketing



DUC E., PATELOUP V., RAY P.
The certification of cam output toolpaths : a necessary improvement



2004
CHANAL H., DUC E., RAY P.
Material removal rate analysis for pocket machining





<-- retour à l'annuaire