Langues

Laboratoire de recherche
UMR 6602 - UCA/CNRS/SIGMA

Annuaire

Grediac Michel


Photo
Fonction : Enseignant chercheur (Permanent Ip)
Axe : Mms
Thème : Ms
Téléphone : +33473288077
Fax : +33 4 7328 8027



Publications associées :
185 publication trouvées


2017
ACL
BEITONE C., BALANDRAUD X., DELPUEYO D., GREDIAC M.
Heat source reconstruction from noisy temperature fields using a gradient anisotropic diffusion filter



JONGCHANSITTO P., PREECHAWUTTIPONG I., BALANDRAUD X., GREDIAC M.
Numerical investigation of the influence of particle size and particle number ratios on texture and force transmission in binary granular composites



ACTI
DELPUEYO D., BALANDRAUD X., GREDIAC M., STANCIU S., CIMPOESU N.
Measurement of mechanical dissipation in SMAs by infrared thermography



2016
ACL
CHEIKHTEGUEDI M., BLAYSAT B., TOUSSAINT E., MOREIRA S., LIANDRAT S., GREDIAC M.
Applying a full-field measurement technique for studying the local deformation in reclaimed asphalt pavements



DELPUEYO D., BALANDRAUD X., GREDIAC M.
Calorimetric signature of the Portevin–Le Châtelier effect in an aluminum alloy from infrared thermography measurements and heat source reconstruction



BLAYSAT B., GREDIAC M., FREDERIC F.
On the propagation of camera sensor noise to displacement maps obtained by DIC - an experimental study



TOUSSAINT E., FOURNELY E., MOUTOUPITTI R., GREDIAC M.
Studying the mechanical behavior of notched wood beams using full-field measurements



OS
ODOUNGA B., MOUTOUPITTI R., TOUSSAINT E., GREDIAC M.
EXPERIMENTAL FRACTURE ANALYSIS OF TROPICAL SPECIES USING THE GRID METHOD



ACTI
DANG D., TOUSSAINT E., MOUTOUPITTI R., GREDIAC M.
ASSESSMENT OF WOOD PROPERTIES UNDER COMPRESSION AND DRYING AT THE RING SCALE WITH THE GRID METHOD



BEITONE C., BALANDRAUD X., GREDIAC M., DELPUEYO D., TILMANT C., CHAUSSE F.
Applying a GAD filter to calculate heat sources from noisy temperature fields



CHEIKHTEGUEDI M., BLAYSAT B., GREDIAC M., LIANDRAT S., MOREIRA S., VELYNE TOUSSAINT E.
Applying a full-field measurement technique to study the mechanical behavior of asphalt mixtures



CHEIKHTEGUEDI M., BLAYSAT B., GREDIAC M., MOREIRA S., LIANDRAT S., TOUSSAINT E.
Applying a full-field measurement technique to study the mechanical behavior of asphalt mixtures



DELPUEYO D., BALANDRAUD X., GREDIAC M.
Applying infrared thermography and heat source reconstruction for the analysis of the Portevin-Le Chatelier effect in an aluminum alloy



ODOUNGA B., MOUTOUPITTI R., TOUSSAINT E., GREDIAC M.
MODE I FRACTURE OF TROPICAL SPECIES USING GRID METHOD IN CONSTANT ENVIRONMENTS: EXPERIMENTAL RESULTS



ODOUNGA B., MOUTOUPITTI R., TOUSSAINT E., GREDIAC M.
MODE I FRACTURE OF TROPICAL SPECIES USING THE GRID METHOD IN CONSTANT ENVIRON- MENTS: EXPERIMENTAL RESULTS



C.TEGUEDI M., TOUSSAINT1 E., LAYSAT B., GREDIAC M., MOREIRA S., LIANDRAT3 S.
Studying the influence of the reclaimed asphalt pavement (RAP) on local deformation properties of asphalt mixtures



CHEIKHTEGUEDI M., TOUSSAINT E., BLAYSAT B., GREDIAC M., MOREIRA S., LIANDRAT S.
Studying the influence of the reclaimed asphalt pavement (RAP) on local deformation properties of asphalt mixtures



ACTN
CHEIKHTEGUEDI M., TOUSSAINT E., BLAYSAT B., GREDIAC M., MOREIRA S., LIANDRAT S.
Etude du comportement mécanique d’enrobés bitumineux recyclés par la méthode de la grille



DJILY D., TOUSSAINT E., MOUTOUPITTI R., GREDIAC M.
Transferts hydriques à l'échelle des cernes de bois : apport des mesures de champs sans contact



COM
CHEIKHTEGUEDI M., TOUSSAINT E., BLAYSAT B., GREDIAC M., MOREIRA S., LIANDRAT S.
Etude du comportement mécanique d’enrobés bitumineux recyclés par la méthode de la grille



DANG D., TOUSSAINT E., MOUTOUPITTI R., GREDIAC M.
Transferts hydriques à l’échelle des cernes de bois : apport des mesures de champs sans contact



AFF
ODOUNGA B., MOUTOUPITTI R., TOUSSAINT E., GREDIAC M.
Suivi des déplacements et fissuration dans les bois tropicaux par la méthode de la grille



2015
ACL
SUN S., GREDIAC M., TOUSSAINT E., MATHIAS J., MATIBAOUCHE N.
Applying a full-field measurement technique to characterize the mechanical response of a sunflower-based biocomposite



SUR F., GREDIAC M.
Automated removal of quasi-periodic noise through frequency domain statistics



SUR F., GREDIAC M.
Measuring the noise of digital imaging sensors by stacking raw images affected by vibrations and illumination flickering



SUR F., GREDIAC M.
On noise reduction in strain maps obtained with the grid method by averaging images affected by vibrations



BALANDRAUD X., BARRERA N., BISCARI P., GREDIAC M., ZANZOTTO G.
Strain intermittency in shape-memory alloys



CHAIAMARIT C., BALANDRAUD X., PREECHAWUTTIPONG I., GREDIAC M.
Stress network analysis of 2D non-cohesive polydisperse granular materials using infrared thermography



MATHIAS J., ALZINA A., GREDIAC M., MICHAUD P., .ROUX P., DEBAYNAST H., DELATTRE C., DUMOULIN N., FAURE T., LARREYLASSALLE P., MATIBAOUCHE N., PENNEC F., SUN S., TESSIERDOYEN N., TOUSSAINT E., WEI W.
Upcycling Sunflower Stems as Natural Fibers for Biocomposite Applications



OS
FOURNELY E., MOUTOUPITTI R., TOUSSAINT E., GREDIAC M.
Springer, Volume 5



ACTI
TOUSSAINT E., BOUCHAIR A., GREDIAC M., DURIF S.
CHARACTERIZATION OF COVER-PLATE BOLTED STEEL JOINTS WITH FULL-FIELD MEASUREMENTS



DANG D., MOUTOUPITTI R., TOUSSAINT E., GREDIAC M.
Experimental characterization of the wood heterogeneities by the grid method: application to European specie



DANG D., TOUSSAINT E., GREDIAC M., MOUTOUPITTI R.
INVESTIGATION OF THE HYDRIC TRANSFER PHENOMENON IN WOOD AT THE RING SCALE WITH THE GRID METHOD



JONGCHANSITTO P., BALANDRAUD X., GREDIAC M., PREECHAWUTTIPONG I.
Measurement of stress network in granular materials from infrared measurement



SUN S., TOUSSAINT E., GREDIAC M., MATHIAS J.
ON THE MECHANICAL CHARACTERIZATION OF A SUNFLOWER-BASED BIOCOMPOSITE USING THE GRID METHOD



BARRERA N., BALANDRAUD X., GREDIAC M., BISCARI P., ZANZOTTO G.
Study of phase transformation intermittency in S.M.A. using the grid method



ACTN
TOUSSAINT E., DURIF S., BOUCHAIR A., GREDIAC M.
Caractérisation expérimentale d’assemblages de plaques boulonnées par mesures de champs sans contact



2014
ACL
GREDIAC M., TOUSSAINT E., PETIT C., MILLIEN A., CUONGNGUYEN D.
A comparative study of the heterogeneous local mechanical response of two types of asphalt mixes



MOUTOUPITTI R., BADULESCU C., GREDIAC M.
Characterization of a cracked specimen with full-field measurements: direct determination of the crack tip and energy release rate calculation



BUBULINCA C., BALANDRAUD X., GREDIAC M., STANCIU S., ABRUDEANU M.
Characterization of the mechanical dissipation in shape-memory alloys during stress-induced phase transformation



SUN S., MATHIAS J., TOUSSAINT E., GREDIAC M.
Characterizing the variance of mechanical properties of sunflower bark for biocomposite applications



GREDIAC M., SUR F.
Effect of sensor noise on the resolution and spatial resolution of the displacement and strain maps obtained with the grid method



SUR F., GREDIAC M.
Sensor noise modeling by stacking pseudo-periodic grid images affected by vibrations



SUR F., GREDIAC M.
Towards deconvolution to enhance the grid method for in-plane strain measurement



JONGCHANSITTO P., BALANDRAUD X., GREDIAC M., BEITONE C., PREECHAWUTTIPONG I.
Using infrared thermography to study hydrostatic stress networks in granular materials



OS
MOUTOUPITTI R., BADULESCU C., GREDIAC M.
Experimental and Numerical Fracture Analysis of a Pre-cracked Aluminum Specimen Using the Grid Method



ACTI
MOUTOUPITTI R., TOUSSAINT E., FOURNELY E., GREDIAC M.
Applying the grid method to investigate crack appearance and propagation in notched wood beams used in individual houses in Europe



SUN S., GREDIAC M., TOUSSAINT E., MATHIAS J.
Characterizing the mechanical response of e biocomposite using the grid method



LACHHAB A., MOUTOUPITTI R., TOUSSAINT E., GREDIAC M.
Evaluation of energy release rate in dried wood material using the grid method



DJILY D., MOUTOUPITTI R., TOUSSAINT E., GREDIAC M.
Experimental evidence of water diffusion gradient in wood using the grid method



FOURNELY E., MOUTOUPITTI R., TOUSSAINT E., GREDIAC M.
Full field measurement on small notched beams by grid method - application to lattice elements



JONGCHANSITTO P., PREECHAWUTTIPONG I., BALANDRAUD X., GREDIAC M., JONGCHANSITTO A.
Numerical study of the influence of the particle number on the granular texture in 2D composite granular media



ABRUDEANU M., PONTHIAUX P., PIERREMILLET J., GABRIELAPLAIASU A., BALANDRAUD X., GREDIAC M., HUEZ J., STANCIU S., RIZEA V., MAGDALENADICU M.
Romanian-French Collaboration for Master and Doctoral Studies in "Materials Engineering"



GREDIAC M., SUR F.
Stabilizing heteroscedastic noise with the generalized Anscombe transform. Application to accurate prediction of the resolution in displacement and strain maps obtained with the grid method



JONGCHANSITTO P., BALANDRAUD X., PREECHAWUTTIPONG I., GREDIAC M.
Thermoelastic stress analysis of composite granular materials



ACTN
FOURNELY E., TOUSSAINT E., MOUTOUPITTI R., GREDIAC M.
Mesures de champs sur une poutre entaillée par la méthode de la grille



COM
SUR F., GREDIAC M.
Enhancing with deconvolution the metrological performance of the grid method



TOUSSAINT E., BOUCHAIR A., GREDIAC M.
Experimental characterization of cover-plate steel bolted connections using the grid method



GREDIAC M., SUR F.
How noise propagates from camera sensor to displacxement and strain maps obtained with the grid method



SUN S., MATHIAS J., GREDIAC M., TOUSSAINT E.
On the mechanical characterization of sunflower/chitosan biocomposites with a full-field measuring technique



AFF
DANG D., MOUTOUPITTI R., TOUSSAINT E., GREDIAC M.
Etude du bois sous sollicitations hydriques à l'échelle du cerne de croissance par la méthode de la grille



SUR F., GREDIAC M.
Sensor noise measurement in the presence of a flickering illumination



2013
ACL
BADULESCU C., BORNERT M., DUPRE J., EQUIS S., GREDIAC M., MOLIMARD J., PICART P., ROTINAT R., VALLE V.
Demodulation of Spatial Carrier Images: Performance Analysis of Several Algorithms



PATEL A., MICHAUD P., PETIT E., DEBAYNAST H., GREDIAC M., MATHIAS J.
Development of a chitosan-based adhesice. Application to wood bonding



DELPUEYO D., BALANDRAUD X., GREDIAC M.
Heat source calculation from noisy temperature fields using an optimized derivative Gaussian filter



SUN S., GREDIAC M.
Hygromechanical characterization of sunflower stems



GARNIER P., LECAM J., GREDIAC M., ABABOUGIRARD S., DUBOIS M.
On the evolution of the viscoelastic properties and its microstructural/chemical origin in filled NBR subjected to coupled thermal and cyclic mechanical loads



PATEL A., MICHAUD P., DEBAYNAST H., GREDIAC M., MATHIAS J.
Preparation of chitosan-based adhesives and assessment of their mechanical properties



BUBULINCA C., BALANDRAUD X., DELPUEYO D., GREDIAC M., STANCIU S., ABRUDEANU M., PLAIASU G., DICU M., NITU E.
Study of a monocrystalline Cu-Al-Ni shape memory alloy by infrared thermography



GREDIAC M., TOUSSAINT E.
Studying the Mechanical Behaviour of Asphalt Mixture with the Grid Method



SUR F., GREDIAC M.
Towards deconvolution to enhance the grid method for in-plane strain measurement



GREDIAC M., SUR F., BADULESCU C., MATHIAS J.
Using deconvolution to improve the metrological performance of the grid method



ACTI
BUBULINCA C., BALANDRAUD X., GREDIAC M., STANCIU S., ABRUDEANU M.
A new method to determinate phase transformation in shape memory alloys: infrared thermography



BUBULINCA C., BALANDRAUD X., GREDIAC M., STANCIU S., ABRUDEANU M.
Applying infrared thermography to characterize the mechanical dissipation in Cu-Zn-Al shape-memory alloys exhibiting various chemical compositions



GREDIAC M., SUR F., BADULESCU C., MATHIAS J.
Deconvolution of strain maps obtained with the grid method



CHAIAMARIT C., BALANDRAUD X., GREDIAC M., PREECHAWUTTIPONG I.
Experimental evidence of stress network in a 2D granular material under confined compression by infrared thermography



DELPUEYO D., BALANDRAUD X., GREDIAC M.
Heat source calculation from noisy temperature fields using a derivative Gaussian filter



GARNIER P., LECAM J., GREDIAC M.
On the evolution of the viscoelastic properties and their microstructural origin in a filled NBR under coupled thermal and cyclic mechanical loadings



COM
SUN S., MATHIAS J., TOUSSAINT E., GREDIAC M.
Caractérisation mécanique de broyats de tiges de tournesol pour la conception de biocomposites



TOUSSAINT E., GREDIAC M., PETIT C., MILLIEN A., C.NGUYEN D.
Characterizing the mechanical behaviour of two types of asphalt mixture with the grid method



GREDIAC M., SUR F., BADULESCU C., MATHIAS J.
Improving the spatial resolution of the grid method with deconvolution



AFF
LACHHAB A., MOUTOUPITTI R., TOUSSAINT E., GREDIAC M.
PROPAGATION DE FISSURE EN MODE I DANS UNE EPROUVETTE EN BOIS PAR MESURES DE CHAMPS SANS CONTACT ET APPROCHE NUMERIQUE



BRE
PATEL A., DEBAYNAST H., MATHIAS J., GREDIAC M., MICHAUD P.
Adhesive Composition Including deacetylated Chitosan



2012
ACL
TOUSSAINT E., BALANDRAUD X., LECAM J., GREDIAC M.
Combining displacement, strain, temperature and heat source fields to investigate the thermomechanical response of an elastomeric specimen subjected to large deformations



DELPUEYO D., GREDIAC M., BALANDRAUD X., BADULESCU C.
Investigation of martensitic microstructures in a monocrystalline Cu-Al-Be shape memory alloy with the grid method and infrared thermography



GARNIER P., LECAM J., GREDIAC M.
On the influence of the number of cycles on the viscoelastic properties of rubber under fatigue loading: another dimension of the Payne effect?



OS
GREDIAC M., HILD F.
Full-field measurements and identification in solid mechanics



PIERRON F., GREDIAC M.
The Virtual Fields Method



ACTI
TOUSSAINT E., BALANDRAUD X., LECAM J., GREDIAC M.
Application of full-field measurements to analyse the thermomechanical response of a three-branch rubber



SUN S., MATHIAS J., GREDIAC M., TOUSSAINT E.
DETERMINATION OF THE MECHANICAL BEHAVIOR OF SUNFLOWER STEM



SUN S., MATHIAS J., TOUSSAINT E., GREDIAC M.
MECHANICAL BEHAVIOR OF BARK OF SUNFLOWER STEM FOR BIO-COMPOSITE APPLICATIONS



COM
GREDIAC M., TOUSSAINT E.
Applying the grid method to investigate the mechanical behavior of asphalt



GARNIER P., LECAM J., GREDIAC M.
Influence of fatigue loading conditions on the Payne effect in filled NBR



BRE
MATHIAS J., GREDIAC M., DEBAYNAST H., MICHAUD P., PATEL A.
Adhesive composition including deacetylated chitosan



2011
ACL
DELPUEYO D., BALANDRAUD X., GREDIAC M.
Applying infrared thermography to analyse martensitic microstructures in a Cu-Al-Be shape-memory alloy subjected to a cyclic loading



BADULESCU C., GREDIAC M., HADDADI M., MATHIAS J., BALANDRAUD X., TRAN H.
Applying the grid method and infrared thermography to investigate plastic deformation in aluminium multicrystal



DEHEEGER A., MATHIAS J., GREDIAC M., VERNEY V.
Studying the thermoviscoelastic response of the Redux 312 adhesive. Part 1: Experimental characterization



DEHEEGER A., MATHIAS J., GREDIAC M.
Studying the thermoviscoelastic response of the Redux 312 adhesive. Part 2: Modeling



ACTI
BALANDRAUD X., TOUSSAINT E., LECAM J., GREDIAC M., BEHNKE R., KALISKE M.
Application of full-field measurements and numerical simulations to analyze the thermo-mechanical response of a three-branch rubber specimen



GARNIER P., LECAM J., GREDIAC M.
Influence of fatigue loading conditions on the Payne effect in filled NBR



PROMMA N., RAKA B., GREDIAC M., TOUSSAINT E., LECAM J., BALANDRAUD X., HILD F.
Processing heterogeneous strain fields with the virtual fields method: a new route for the mechanical characterization of elastomeric materials



DELPUEYO D., GREDIAC M., ALANDRAUD B., BADULESCU C.
Studying phase transformations in a shape memory alloy with full-field measurement techniques



ACTN
SOUDE M., GOURVES R., GREDIAC M., HADDANI Y., TALON A.
Etude d'impact sur les massifs renforcés par géotextile alvéolaire



DELPUEYO D., BALANDRAUD X., GREDIAC M., BADULESCU C.
Etude de la transition de phase d’un monocristal d’AMF en Cu-Al-Be par techniques de mesures de champs



COM
DELPUEYO D., BALANDRAUD X., GREDIAC M., BADULESCU C.
Experimental evidence of phase transformations in a Cu-Al-Be S.M.A. monocrystalline tensile specimen using full-field measurement techniques



BADULESCU C., GREDIAC M., MATHIAS J.
Improving the metrological performance of the grid method by accounting for grid deffects



2010
ACL
BALANDRAUD X., DELPUEYO D., GREDIAC M., ZANZOTTO G.
Almost compatible microstructures in shape memory alloys



BALANDRAUD X., ZHOU G., GREDIAC M., TESSIERDOYEN N.
Experimental evidence of thermal effects in multiphase ceramic specimens subjected to cyclic loading



KIM H., CHO M., LEE J., DEHEEGER A., GREDIAC M., MATHIAS J.
Three dimensional stress analysis of a composite patch using stress functions



DO
HUNTLEY J., GREDIAC M.
Strain, an International Journal for Solid Mechanics



ACLN
SOUDE M., GOURVES R., GREDIAC M., HADDANI Y., TALON A.
Modélisation discrète d'une structure en sol renforcé par géocellulaire et soumise à un impact.



ACTI
BADULESCU C., GREDIAC M., MATHIAS J., BALANDRAUD X., HADDADI H.
Investigating an aluminum multi-crystal with full-field measurement techniques



DELPUEYO D., BALANDRAUD X., GREDIAC M.
Thermoelastic analysis of copper-based monocristalline shape-memory alloys



ACTN
SOUDE M., GOURVES R., GREDIAC M., HADDANI Y., TALON A.
Modélisation discrète d'une structure en sol renforcé par géocellulaire et soumise à un impact



INV
GREDIAC M.
Identification et mesures de champs



GREDIAC M.
Identification from full-field measurements: a promising perspective in experimental mechanics SEM annual conference



GREDIAC M., BONNET M.
Identifying constitutive parameters from full-field measurements: a challenging issue in computational mechanics



COM
PATEL A., DEBAYNAST H., MICHAUD P., GREDIAC M., MATHIAS J.
Developing a new structural adhesives from bioresources



PATEL A., DEBAYNAST H., MICHAUD P., GREDIAC M., MATHIAS J.
Etude expérimentale d'adhésifs biosourés



PATEL A., DEBAYNAST H., MICHAUD P., GREDIAC M., MATHIAS J.
Etude expérimentale de colles biosourcées



BRE
PATEL A., DEBAYNAST H., MATHIAS J., GREDIAC M., MICHAUD P.
Bioadhésif à base de chitosane



2009
ACL
DEHEEGER A., MATHIAS J., GREDIAC M.
A closed-form solution for the thermal stress distribution in rectangular metal/composite bonded joints



GUELON T., TOUSSAINT E., LECAM J., PROMMA N., GREDIAC M.
A new characterization method for rubber



BADULESCU C., GREDIAC M., MATHIAS J., ROUX D.
A procedure for accurate one-dimensional strain measurement using the grid method



PROMMA N., RAKA B., GREDIAC M., TOUSSAINT E., LECAM J., BALANDRAUD X., HILD F.
Application of the virtual fields method to mechanical characterization of elastomeric materials



BORNERT M., BREMAND F., DOUMALIN P., DUPRE J., FAZZINI M., GREDIAC M., HILD F., MISTOUT S., MOLIMARD J., ORTEU J., ROBERT L., SURREL Y., VACHER P., WATTRISSE B.
Assessment of digital image correlation measurement errors: methodology and results



BADULESCU C., GREDIAC M., MATHIAS J.
Investigation of the grid method for accurate in-plane strain measurement



PASTOR M., BALANDRAUD X., ROBERT J., GREDIAC M.
Lifetime prediction of aluminium structures reinforced with composite patches



SYEDMUHAMMAD K., TOUSSAINT E., GREDIAC M.
Optimization of a mechanical test on composite plates with the Virtual Fields Method



POTTIER T., MOUTRILLE M., LECAM J., BALANDRAUD X., GREDIAC M.
Study on the use of motion compensation technique to determine heat sources. Application to large deformations on cracked rubber specimens



MOUTRILLE M., DERRIEN K., BAPTISTE D., BALANDRAUD X., GREDIAC M.
Through-thickness strain field measurement in a composite/aluminium adhesive joint.



ACTI
DEHEEGER A., BADULESCU C., MATHIAS J., GREDIAC M.
Accurate strain measurement with the grid method



LECAM J., BALANDRAUD X., GREDIAC M., MOUTRILLE M., POTTIER T.
Applying infrared thermography to determine heat sources at the crack tip of rubber specimens



BADULESCU C., MATHIAS J., GREDIAC M.
Calul direct de champs de déformations avec la méthode de grille : principe et application



MOLIMARD J., BADULESCU C., BORNERT M., DUPRE J., EQUIS E., GREDIAC M., PICART P., ROTINAT R., VALLE V.
Caractérisation métrologique des méthodes de décodage d'images à porteuses spatiales



DEHEEGER A., BADULESCU C., MATHIAS J., GREDIAC M.
Experimental Study of thermal stresses in a bonded joint



DEHEEGER A., BADULESCU C., MATHIAS J., GREDIAC M.
Experimental Study of thermal stresses in a bonded joint



MAGERAND L., BARTOLI L., GREDIAC M.
Extraction des constantes d'élasticité d'un matériau en petite déformation plane à partir du flot optique



LEE J., CHO M., KIM H., GREDIAC M.
Mechanical Properties of Composite Laminates Patches with an Aluminum Substrate



ACTN
MAGERAND L., BARTOLI A., GREDIAC M., THIESSE J.
Détermination de la matrice de rigidité d’un matériau en petites déformations planes à partir du flot optique



DELPUEYO D., BALANDRAUD X., GREDIAC M.
Etude par thermographie infrarouge de microstructures martensitiques dans des monocristaux d'alliages à mémoire de forme



COM
BADULESCU C., GREDIAC M., MATHIAS J.
Accurate strain measurement with the grid method



2008
ACL
OH J., CHO M., KIM J., GREDIAC M.
A finite element formulation for based on an enhanced first order shear deformation theory for composite and sandwich structures



PASTOR M., BALANDRAUD X., GREDIAC M., ROBERT J.
Applying infrared thermography to study the heating of 2024-T3 aluminium specimens under fatigue loading



MATHIAS J., GREDIAC M.
Applying the grid method to validate a numerical model predicting the transverse shear stress distribution in patched structure



MOUTRILLE M., BALANDRAUD X., GREDIAC M., DERRIEN K., BAPTISTE D.
Applying thermoelasticity to study stress relief and crack propagation in aluminium specimens patched with composite material



SYEDMUHAMMAD K., TOUSSAINT E., GREDIAC M., AVRIL S.
Characterization of composite plates using the virtual fields method using optimized loading conditions



PALUCH B., GREDIAC M., FAYE A.
Combining a finite element programme and a genetic algorithm to optimize composite structures with variable thickness



MATHIAS J., GREDIAC M., BALANDRAUD X.
Design of optimized patches to reinforce damaged wings



PASTOR M., BALANDRAUD X., GREDIAC M., ROBERT J.
On the fatigue response of aluminium specimens reinforced with carbon-epoxy patches



AVRIL S., BONNET M., BRETELLE A., GREDIAC M., HILD F., IENNY P., LATOURTE F., LEMOSSE D., PAGANO S., PAGNACCO S., PIERRON F.
Overview of identification methods of mechanical parameters based on full-field measurements



ACTI
MOLIMARD J., BADULESCU C., BORNERT M., DUPRE J., EQUIS E., GREDIAC M., PICART P., ROTINAT R., VALLE V., WATTRISSE B.
Caractérisation métrologique du décodage de l'information dans les méthodes optiques de champs : application à l'inter-comparaison de méthodes à codage périodique



COM
POTTIER T., MOUTRILLE M., BALANDRAUD X., LECAM J., GREDIAC M.
Applying infrared thermography to characterize cracked rubber specimens subjected to cyclic loading



PROMMA N., TOUSSAINT E., BALANDRAUD X., LECAM J., GREDIAC M., RAKA B.
Characterization of elastomeric materials with full-field measurements



2007
ACL
KIM J., PIERRON F., GREDIAC M., WISNOM R.
A procedure for producing reflective coatings on plates to be used for full-field slope measurements by a deflectometry technique



MULLER M., TOUSSAINT E., DESTREBECQ J., GREDIAC M.
Investigation Into The Time-Dependant Behaviour Of Reinforced Concrete Specimens Strengthened With Externally Bonded Cfrp-Plates



DESTREBECQ J., GREDIAC M., SIERRARUIZ V.
The transfer length in reinforced concrete structures strengthened with composite plates: experimental study and modelling



DO
GREDIAC M., HUNTLEY J.
Strain, an International Journal for Solid Mechanics



ACTI
MOUTRILLE M., BALANDRAUD X., GREDIAC M., BAPTISTE D., DERRIEN K.
Experimental study of the stress relief in pached aluminium specimens



PASTOR M., BALANDRAUD X., ROBERT J., GREDIAC M.
Fatigue lifetime prediction of aeronautical components



PASTOR M., BALANDRAUD X., ROBERT J., GREDIAC M.
Fatigue properties of 2024-T3 aluminium specimens reinforced with composite patches



ACTN
PROMMA N., TOUSSAINT E., BALANDRAUD X., GREDIAC M.
Application de la méthode des champs virtuels en grandes déformations pour identifier des paramètres matériaux à partir de mesures de champs cinématiques : principe et simulation



MOUTRILLE M., BALANDRAUD X., GREDIAC M., DERRIEN K., BAPTISTE D.
Application de la thermographie infrarouge à l'étude de la diminution de contrainte dans une éprouvette renforcée par patch composite



PASTOR M., BALANDRAUD X., GREDIAC M., ROBERT J.
Etude du comportement en fatigue d'éprouvettes renforcées par patchs composites



2006
ACL
MATHIAS J., BALANDRAUD X., GREDIAC M.
Applying a genetic algorithm to the optimization of composite patches



GREDIAC M., PIERRON F.
Applying the virtual fields method to the identification of plastic constitutive equations



MATHIAS J., BALANDRAUD X., GREDIAC M.
Experimental investigation of composite patches with a full-field measurement method



MATHIAS J., BALANDRAUD X., GREDIAC M.
Influence de la séquence d'empilement et de la géométrie d�un patch composite sur l'efficacité du renforcement d'une structure métallique trouée



MATHIAS J., GREDIAC M., BALANDRAUD X.
On the bidirectional stress distribution in rectangular bonded composite patches



TOUSSAINT E., DESTREBECQ J., GREDIAC M.
Rheologic Effects In Reinforced Concrete Beams Strengthened With Cfrp-Composite Plates



GREDIAC M., PIERRON F., AVRIL S., TOUSSAINT E.
The Virtual Fields Method For Extracting Constitutive Parameters From Full Fields Measurements: A Review



TOUSSAINT E., GREDIAC M., PIERRON F.
The Virtual Fields Method With Piecewise Virtual Fields



ACTI
PASTOR M., BALANDRAUD X., ROBERT J., GREDIAC M.
Damage analysis of 2024-T3 aluminium specimens using infrared thermography



MATHIAS J., BALANDRAUD X., GREDIAC M.
Experimental evidence of the load transfer zone in curved composite patches using the grid method



MATHIAS J., BALANDRAUD X., GREDIAC M.
Experimental study of composite patches subjected to a thermal loading



KIM J., PIERRON F., SYEDMUHAMMAD K., WISNOM M., GREDIAC M., TOUSSAINT E.
Identification of the local stiffness reduction of a damaged composite plate using the virtual fields method



PASTOR M., BALANDRAUD X., GREDIAC M., ROBERT J.
Life extension of 2024-T3 aluminium specimens reinforced by composite patches



SYEDMUHAMMAD K., TOUSSAINT E., GREDIAC M.
Optimization of specimen shape for improved identifiability of material constitutive parameters using the virtual fields metho



MOUTRILLE M., DERRIEN D., BAPTISTE D., GREDIAC M., BALANDRAUD X.
Through-thickness strain field measurement in a composite/aluminium adhesive joint



MOUTRILLE M., DERRIEN K., BAPTISTE D., BALANDRAUD X., GREDIAC M.
Through-thickness strain field measurement in an adhesive joint between composite and aluminium



2005
ACL
TOUSSAINT E., DESTREBECQ J., GREDIAC M.
A Detailed Study Of Crack Propagation In Cement-Based Fibre Composite Beams Under Bending



2004
MULLER M., TOUSSAINT E., DESTREBECQ J., GREDIAC M.
Experimental And Numerical Study Of Reinforced Concrete Specimens Strengthened With Composite Plates



2003
GREDIAC M., TOUSSAINT E., PIERRON F.
Special Virtual Fields For The Direct Determination Of Material Parameters With The Virtual Fields Method. 3-Application To The Bending Rigidities Of Anisotropic Plates



2002
GREDIAC M., TOUSSAINT E., PIERRON F.
Special Virtual Fields For The Direct Determination Of Material Parameters With The Virtual Fields Method. 1- Principle And Definition



GREDIAC M., TOUSSAINT E., PIERRON F.
Special Virtual Fields For The Direct Determination Of Material Parameters With The Virtual Fields Method. 2- Application To In-Plane Properties





<-- retour à l'annuaire