Langues

Laboratoire de recherche
UMR 6602 - UCA/CNRS/SIGMA

Annuaire

Lapusta Yuri


Photo
Fonction : Enseignant chercheur (Permanent Ip)
Axe : Mms
Thème : Ms
Téléphone : +33473288049
Fax : +33 4 7328 8027



Publications associées :
71 publication trouvées


2016
ACL
BOUDET J., AUSLENDER F., BORNERT M., LAPUSTA Y.
An incremental variational formulation for the prediction of the effective work-hardening behavior and field statistics of elasto-(visco)plastic composites



YASNIY O., LAPUSTA Y.
Effect of the defect initial shape on the fatigue lifetime of a continuous casting machine



VIUN O., LOBODA V., LAPUSTA Y.
Electrically and magnetically induced Maxwell stresses in a magneto-electro-elastic medium with periodic limited permeable cracks



GOVORUKHA V., KAMLAH M., LOBODA V., LAPUSTA Y.
Interface cracks in piezoelectric materials



YASNIY O., PYNDUS Y., BREVUS V., IASNII V., LAPUSTA Y.
Lifetime estimation of superheater header



2015
VOLOSHKO O., LOBODA V., LAPUSTA Y.
Investigation of a crack situated in a thin adhesive layer between two different isotropic materials



SHEVELEVA A., LAPUSTA Y., LOBODA V.
Opening and contact zones of an interface crack in a piezoelectric bimaterial under combined compressive-shear loading



VIUN O., LABESSEJIED F., MOUTOUPITTI R., LOBODA V., LAPUSTA Y.
Periodic limited permeable cracks in magneto-electro-elastic media



VIUN O., LAPUSTA Y., LOBODA V.
Pre-fracture zones modeling for a limited permeable crack in an interlayer between magneto-electro-elastic materials



STRAUB T., BERWIND M., KENNERKNECHT T., LAPUSTA Y., EBERL C.
Setup for Damage Detection Into the Very High Cycle Fatigue Regime



ACTI
ELKABIR S., MOUTOUPITTI R., RECHO N., LAPUSTA Y., DUBOIS F.
Numerical study of crack path by MMCG specimen using M integral



2014
ACL
LOBODA V., SHEVELEVA A., LAPUSTA Y.
An electrically conducting interface crack with a contact zone in a piezoelectric bimaterial



IASNII V., MARUSCHAK P., YASNIY O., LAPUSTA Y.
Hydrogen Crack Growth Resistance of Thermal Power Plant Material Collector



LAPUSTA Y., VIUN O., LOBODA V.
Modeling of pre-fracture zones for limited permeable crack in piezoelectric materials



MARCHANT M., LABESSEJIED F., GIPPIUS N., LAPUSTA Y.
Modelling of a hydrogel diffraction grating used for pH-sensing



BREVUS V., YASNIY O., LAPUSTA Y.
Structural Integrity Assessment of Thermal Power Plant Superheater Collector



ACTI
VIUN O., LABESSEJIED F., LOBODA V., LAPUSTA Y.
Pre-fracture zones for a limited permeable crack in an interlayer between magneto-electro-elastic materials



INV
VIUN O., LABESSEJIED F., MOUTOUPITTI R., LOBODA V., LAPUSTA Y.
Study of active piezoelectric structures with cracks



THE
VIUN O., LABESSEJIED F., MOUTOUPITTI R., MEZOUAR Y., LOBODA V., LAPUSTA Y.
Modeling of active piezoelectric composite structures with cracks



2013
ACL
YASNIY O., LAPUSTA Y., PYNDUS Y., SOROCHAK A., YASNIY V.
Assessment of lifetime of railway axle



ZALACHAS N., CAI S., LAPUSTA Y., SUO Z.
Crease in a ring of a pH-sensitive hydrogel swelling under constraint



YASNIY V., MARUSCHAK P., YASNIY O., LAPUSTA Y.
On thermally induced multiple cracking of a surface: an experimental study



KOZINOV S., LOBODA V., LAPUSTA Y.
Periodic set of limited electrically permeable interface cracks with contact zones



OS
MOUTOUPITTI R., CHAZAL C., LABESSEJIED F., LAPUSTA Y.
Stress Intensity Factors for Viscoelastic Axisymmetric Problems Applied to Wood



ACTI
MARCHANT M., LABESSEJIED F., MOUTOUPITTI R., GIPPIUS N., LAPUSTA Y.
A coupled FE-photonic model of a hydrogel diffraction grating used for pH-sensing



MOUTOUPITTI R., LABESSEJIED F., BAGANGOYE B., LAPUSTA Y.
Evaluation of process zone using M integral and finite elements method for viscoelastic orthotrope materials



VIUN O., LABESSEJIED F., MOUTOUPITTI R., MEZOUAR Y., LOBODA V., LAPUSTA Y.
Modeling of active piezoelectric composite structures with cracks



2012
ACL
BREVUS V., YASNIY O., MOUTOUPITTI R., LAPUSTA Y.
ASSESSMENT OF THE PROBABILITY OF FAILURE OF REACTOR VESSELS AFTER WARM PRE-STRESSING USING MONTE CARLO SIMILATIONS



KNYSH P., LOBODA V., LABESSEJIED F., LAPUSTA Y.
An electrically charged crack in a piezoelectric material under remote electromechanical loading



VOLOSHKO O., LAPUSTA Y., LOBODA V.
Construction of an approximating function in the prefracture zone for a crack in an adhesive interlayer between two isotropic materials



ACTI
ZALACHAS N., CAI S., SUO Z., LAPUSTA Y.
Mechanical behavior of a pH-sensitive hydrogel ring used in a micro-optical device



2011
ACL
MOUTOUPITTI R., CHAZAL C., LABESSEJIED F., LAPUSTA Y.
A generalization of Mv integral to axisymmetric problems for viscoelastic materials



LAPUSTA Y., KOMAROV A., LABESSEJIED F., MOUTOUPITTI R., LOBODA V.
Limited permeable crack moving along the interface of a piezoelectric bi-material



LAPUSTA Y., LABESSEJIED F., SAMBORSKAYA A., WAGNER W.
On the effects of interacting anisotropic fibers on the microbuckling in a composite



YASNIY O., MARUSCHAK P., LAPUSTA Y.
Probabilistic modeling of surface crack growth in a roll of continuous casting machine



RIOUAL F., QUINIOU A., LAPUSTA Y.
The Rolling Transition in a Granular Flow along a Rotating Wall



2010
MARCOMBE R., CAI S., HONG W., ZHAO X., LAPUSTA Y., SUO Z.
A theory of constrained swelling of a pH-sensitive hydrogel



VOLOSHKO O., LAPUSTA Y., LOBODA V.
Analytical and numerical study of cohesive zones for a crack in an adhesive layer between identical isotropic materials



LOBODA V., LAPUSTA Y., SHEVELEVA A.
Limited permeable crack in an interlayer between piezoelectric materials with different zones of electrical saturation and mechanical yielding



ACTI
VOLOSHKO O., LAPUSTA Y., LOBODA V.
Analysis of Pre-Fracture Zones for a Crack in an Adhesive Layer between Identical Isotropic Materials



VOLOSHKO O., LABESSEJIED F., LAPUSTA Y., LOBODA V.
Analysis of Pre-fracture Zone for a Crack in an Adhesive Layer between Two Isotropic Materials



MARCOMBE R., CAI S., ZHAO X., SUO Z., HONG W., LAPUSTA Y.
Constrained Swelling of a pH-Sensitive Hydrogel



LAPUSTA Y., MOUTOUPITTI R., DIEZ M., TORT M.
Modeling of Cracking in Laminated Composites



GIOVINAZZO M., TSUKROV I., TODD G., FRUSCELLO M., GOERING J., COLLIN G., LAPUSTA Y.
Multiscale numerical modeling of 3d textile composites to predict cure-induced microcracking



LABESSEJIED F., LAVET C., POUMARAT G., LAPUSTA Y.
On Measurement of Mechanical Properties of Small Animal Bones



2009
ACL
HARICH J., LAPUSTA Y., WAGNER W.
3D FE-modeling of surface and anisotropy effects during microbuckling in fiber composites



ZALACHAS N., LASKEWITZ B., KAMLAH M., PRUME K., LAPUSTA Y., TIEDKE S.
Effective piezo-electric coefficients of ferroelectric thin films on elastic substrates



LAPUSTA Y., LOBODA V.
Electro-mechanical yielding for a limited permeable crack in an interlayer between piezoelectric materials



LEQUINIOU A., RIOUAL F., HERITIER P., LAPUSTA Y.
Experimental study of the bouncing trajectory of a particle along a rotating wall.



LAVET C., LAPUSTA Y., TOUSSAINT E., LABESSEJIED F., POUMARAT G.
On Measuring of Overall Mechanical Properties of Small Animal Bones using Grid Method



ACTI
YASNIY P., GLADJO V., LAPUSTA Y., FEDAK S., SHULGAN I.
Modelling of crack opening with account for the structural heterogeneity parameters



MOSCARDO M., ZHAO X., SUO Z., LAPUSTA Y.
On designing dielectric elastomer actuators. In: SPIE Smart Structures and Materials &



2008
ACL
LAPUSTA Y., HARICH J., WAGNER W.
3D FE-model for fiber interaction effects during microbuckling in composites with isotropic and anisotropic fibers



RIOUAL F., LEQUINIOU A., LAPUSTA Y.
Impact of a bead on a rotating wall



LOBODA V., LAPUSTA Y., GOVORUKHA V.
Mechanical and electrical yielding for an electrically insulated crack in an interlayer between piezoelectric materials



MOSCARDO M., ZHAO X., SUO Z., LAPUSTA Y.
On designing dielectric elastomer actuators



GUZ A., LAPUSTA Y., SAMBORSKAYA A.
Stability of a row of long interacting fibers in an elastic matrix



YASNIY P., MARUSCHAK P., LAPUSTA Y., HLADO V., BARAN D.
Thermal fatigue material degradation in caster rolls' surface layers



ACTI
LAPUSTA Y., SAMBORSKAYA A., BRETON T., BEUCLER T.
Analysis of matrix and interface cracks in laminates



ZALACHAS N., LASKEWITZ B., KAMLAH M., PRUME K., LAPUSTA Y., TIEDKE S.
Determination of effective piezoelectric coefficients of PZT thin films on a substrate



YASNIY O., PYNDUS Y., LAPUSTA Y.
Stochastic analysis of fatigue crack growth under variable amplitude loading



2007
ACL
LOBODA V., LAPUSTA Y., SHEVELEVA A.
Electro-mechanical pre-fracture zones for an electrically permeable interface crack in a piezoelectric bimaterial



PIAT R., LAPUSTA Y., B\AOHLK E., GUELLALI M., REZNIK B., GERTHSEN D., ENGFEICHEN T., OBERACKER R., HOFFMANN M.
Microstructure-induced thermal stresses in pyrolytic carbon matrices at temperatures up to 2900°C



ACTI
LEQUINIOU A., RIOUAL F., LAPUSTA Y.
Granular flow under the action of centrifugal force: a critical dynamic friction coeffcient



LAPUSTA Y., SAMBORSKAYA A.
Mathematical modeling of instabilities in composites



LAPUSTA Y., YASNIY P., PYNDUS Y., SHULGAN I.
Measurement of the elastoplastic strain at the crack tip on the specimen surface



2006
ACL
LOBODA V., LAPUSTA Y., SHEVELEVA A.
Analysis of pre-fracture zones for an electrically permeable crack in an interlayer between piezoelectric materials



YASNIY P., MARUSHCHAK P., LAPUSTA Y.
Experimental study of crack growth in a bimetal under fatigue and fatigue-creep conditions



ACTI
YASNIY P., MARUSHCHAK P., LAPUSTA Y., BARAN D.
Evaluation of in-service surface cracking of rolls of continuous casting machines



LAPUSTA Y.
Micromechanics of compressive strength of fiber composites



LAPUSTA Y.
Near-surface microbuckling in fiber composites





<-- retour à l'annuaire