BAMAAROUF M., PACCOT F., SARRY L., CHANAL H.
Development of a Robotic Ultrasound System to Assist Ultrasound Examination of Pregnant Women
IEEE Transactions on Medical Robotics and Bionics, vol. 1, p. 1--10
2024


ASSEKO ELLA M., GOLI G., PAMBOU NZIENGUI C., GRIL J., FOURNELY E., MOUTOU PITTI R.
Comparative investigation on viscoelastic and mechanosorptive creep behavior of two tropical hardwoods and one temperate softwood
European Journal of Wood and Wood Products, vol. 1, p. 1
2023


RIPARBELLI L., DIONISI-VICI P., MAZZANTI P., BRÉMAND F., DUPRÉ J., FIORAVANTI M., GOLI G., HELFER T., HESSER F., JULLIEN D., MANDRON P., RAVAUD E., TOGNI M., UZIELLI L., BADEL E., GRIL J.
Coupling numerical and experimental methods to characterise the mechanical behaviour of the $Mona\ Lisa$: a method to enhance the conservation of panel paintings
Journal of Cultural Heritage, vol. 62, p. 376--386
2023 jul.


VLACHAKIS G., COLOMBO C., GIOUVANIDIS A., SAVALLE N., LOURENÇO P.
Experimental characterisation of dry-joint masonry structures: Interface stiffness and interface damping
Construction and Building Materials, vol. 392, p. 130880
2023


COLOMBO C., SAVALLE N., FUNARI M., VLACHAKIS G., GIOUVANIDIS A., KARIMZADEH S., LOURENÇO P.
Experimental investigation of the horizontal load orientation on masonry corner failure
International Journal of Masonry Research and Innovation, vol. 257347469, p. 10
2023


GUYON J., CHANAL H., BOUDON B., BLAYSAT B.
Geometric modeling with small defects of over-constrained Parallel Kinematic Machine
Mechanism and Machine Theory, vol. 179, p. 105120
2023 jan


BONTEMPS A., GODI G., FOURNELY E., MOUTOU-PITTI R., GRIL J.
Implementation of an optical measurement method for monitoring mechanical behaviour
experimental techniques, vol. 1, p. 1
2023 may


ESSALEM M., CHERRADI T., AMZIANE S., TEGUEDY M.
Influence of Seashell on the Physical, Mechanical and Thermal Properties of Brick Mortar Mixtures
Open Civil Engineering Journal, vol. 17, p. 1--36
2023 jan 13


SHI Y., BLAYSAT B., CHANAL H., GRÉDIAC M.
Introducing Virtual DIC to Remove Interpolation Bias and Process Optimal Patterns
Experimental Mechanics, vol. 1, p. 1--17
2023 feb 14


HOMORO O., AMZIANE S., CANULLO M., CONTAMINE R.
Mechanical characterization of flax textile reinforced cement matrix: effect of matrix parameters and reinforcement amount
European Journal of Environmental and Civil Engineering, vol. 1, p. 1--16
2023 mar 28


HARRAT Z., CHATBI M., KROUR B., HADZIMA-NYARKO M., RADU D., AMZIANE S., BACHIR BOUIADJRA M.
Modeling the Thermoelastic Bending of Ferric Oxide (Fe2O3) Nanoparticles-Enhanced RC Slabs
Materials, vol. 16, p. 3043
2023 apr


VAN ROOIJ A., BADEL E., BARCZI J., CARAGLIO Y., ALMERAS T., GRIL J.
Modelling the growth stress in tree branches: eccentric growth vs. reaction wood
Peer Community Journal, vol. 3, p. 78
2023 aug. 07


LAKREB N., SEN U., TOUSSAINT E., AMZIANE S., DJAKAB E., PEREIRA H.
Physical properties and thermal conductivity of cork-based sandwich panels for building insulation
Construction and Building Materials, vol. 368, p. 130420
2023 mar


AMZIANE S., KHAYAT K., SONEBI M., PERROT A.
RILEM TC 266-MRP - Round-Robin Rheological Tests on High Performance Mortar and Concrete with Adapted Rheology: Evaluating Structural Build-up at Rest of Mortar and Concrete
Materials and structures, vol. 6, p. 1--16
2023 may 09


FEYS D., SONEBI M., AMZIANE S., DJELAL C., EL-CHEIKH K., FATAEI S., GREIM M., IVANOVA I., KELLER H., KHAYAT K., LIBESSART L., MECHTCHERINE V., NAVARRETE I., PERROT A., SECRIERU E., VANHOVE Y.
RILEM TC 266-MRP: round-robin rheological tests on high performance mortar and concrete with adapted rheology—rheometers, mixtures and procedures
Materials and structures, vol. 56, p. 90
2023 may


NADOUR Y., BOUZIADI F., HAMRAT M., BOULEKBACHE B., AMZIANE S., HADDI A., LABED A.
Short- and long-term properties of self-compacting concrete containing recycled coarse aggregate under different curing temperatures: experimental and numerical study
Materials and structures, vol. 56, p. 83
2023 may


SEIFEDDINE K., AMZIANE S., TOUSSAINT E.
State of the art on the hydraulic properties of pervious concrete
Road Materials and Pavement Design, vol. 1, p. 1--36
2023 jan


SAVALLE N., MONCHAL C., VINCENS E., FORCIOLI S., LOURENCO P.
Static and seismic design of dry stone retaining walls (dsrws) following eurocode standards
engineering structures, vol. 274, p. 114847
2023 jan


JURY A., BALANDRAUD X., HELLER L.
Thermal conductivity and specific heat capacity of austenite and
int. j. thermophys., vol. 44, p. 162
2023 nov


BRÉMAUD I., ALIX C., BACKES B., CABROLIER P., CUFAR K., GILLES N., GRABNER M., GRIL J., MATSUO-UEDA M., POIDEVIN N., PONT O., ROONEY S.
Time4WoodCraft, the time of wood craftspersons, the time of crafts’ wood – a transdisciplinary exploration
Archéologie, société et environnement, vol. 3, p. 164--181
2023


COLOMBO C., VLACHAKIS G., SAVALLE N., GIOUVANIDIS A., FERNANDES L., ANGEL C., VADALÀ F., LOURENÇO P.
A Comparative Experimental Campaign to Estimate the Normal Interface Stiffness of Dry-Joint Masonry Structures
18 Springer Nature Switzerland C. Chastre
2023 jun 06


AGOSSOU O., HOMORO O., AMZIANE S.
Application of Natural FRCM Composites in Structural Strengthening/Rehabilitation: State-of-the-Art Analysis
1 Springer Nature Switzerland S. AMZIANE
2023 jun. 14


BAKKOUR A., OULDBOUKHITINE S., BIWOLE P., AMZIANE S.
Assessing Hygrothermal Parameters of Plant-Based Building Materials for Simulation: A Mini Review
2 Springer Nature Switzerland S. AMZIANE
2023 jun. 14


BIKOKO T., TCHAMBA J., GILDAS N., AMZIANE S.
Assessing the Mechanical and Durability Properties of Recycled Polyethylene Terephthalate (PET) Plastic Soil
3 Springer Nature Switzerland S. AMZIANE
2023 jun. 14


AGOSSOU O., AMZIANE S.
Experimental Investigation on the Strengthening of Gypsum Board by Flax Fibres
4 Springer Nature Switzerland S. AMZIANE
2023 jun. 14


SAVALLE N., FUNARI M., FERNANDES L., COLOMBO C., SZABÓ S., HUSSAINI S., KARIMZADEH S., LOURENÇO P.
Large Static Testing Equipment: Design and Testing of a Settlement Facility
15 Springer Nature Switzerland C. Chastre
2023 jun 06


BARDOUH R., HOMORO O., AMZIANE S.
Reinforced Bio-Based Concrete by Natural FRCM
5 Springer Nature Switzerland S. AMZIANE
2023 jun. 14


COLLET F., MERTENS S., FARIA P., AMZIANE S., COLINART T., MAGNIONT C., PRÉTOT S., FILHO R., LAGOUIN M.
Rilem TC 275 HDB – International RRT on MBV Measurement of Vegetal Concrete
1 Springer Nature Switzerland F. Benboudjema
2023 jun. 11


SCHMIDT W., MIDROIT L., CUNNINGHAM P., MILLER S., AMZIANE S.
The Influence of Biochar on the Flow Properties, Early Hydration, and Strength Evolution of Paste
6 Springer Nature Switzerland S. AMZIANE
2023 jun. 14


BARDOUH R., TOUSSAINT E., AMZIANE S., MARCEAU S., MARTINHAO N.
Towards Biobased Concretes with Tailored Mechanical Properties
7 Springer Nature Switzerland S. AMZIANE
2023 jun. 14


BADEL E., GRIL J., THÉRY I.
Prodeedings of the 11th Wood Sciences Conference

2023 jun. 21


VLACHAKIS G., COLOMBO C., GIOUVANIDIS A., MENDES N., SAVALLE N., LOURENÇO P.
ENERGY LOSS MECHANISMS OF ROCKING BLOCKS: EXPERIMENTAL OBSERVATIONS
9th ECCOMAS
2023 jun 12


ASIKOGLU A., BARONTINI A., SAVALLE N., VASCONCELOS G., LOURENÇO P.
Experimental Analysis of Unreinforced Masonry Buildings Through the Quasi-Static Test: A Half-Scale Two-Story Modern Masonry Building
North American Masonry Conference
2023 jun 11


SUGIMOTO H., CHEVALIER B., BREUL P., MUKUNOKI T., OTANI J.
Numerical analysis of the behaviour of the sand sandwiched by two sheet piles
Proceedings 10th NUMGE 2023
2023 jun. 26


COLOMBO C., VLACHAKIS G., ANGEL C., GIOUVANIDIS A., SAVALLE N., MENDES N., LOURENC P.
Tangential Interface Stiffness Estimation of Dry-Joint Masonry Structures Through an Extended Experimental Campaign
North American Masonry Conference
2023 jun 11


BERNAR A., PREVOT C., LEGARDEUR J., CHANAL H.
Comment favoriser la transition vers l'industrie 4.0 dans le secteur textile-habillement : étude de cas du déploiement d'un cobot au sein de l'entreprise Petit Bateau
S-MART 2023 : 18ème Colloque national S.mart
2023 apr. 03


SAVALLE N., LOURENÇO P., BREUL P.
Vulnerability of masonry structures to settlement loading: a numerical DEM investigation
Academic Journal of Civil Engineering, vol. 41, p. 31--44
2023


ENGONGA EDZANG A., GRIL J., MOUTOU PITTI R., BADEL E.
Mise en évidence par haubanage de la réponse thigmomorphogénétique de deux clones d'hévéa
12eme Journees Scientifiques du GDR Sciences du Bois
2023 nov. 22


GRIL J., MOUTOU PITTI R., BADEL E.
Mise en évidence par haubanage de la réponse thigmomorphogénétique de deux clones d'hévéa
12èmes journées scientifiques du GDR Sciences du Bois
2023 nov. 22


SURGET C., DUBREUIL S., MORIO J., MATTRAND C., BOURINET J., GAYTON N.
Sensitivity to statistical estimation uncertainties and probabilistic model identification
Journées annuelles GDR MASCOT-NUM 2023
2023


JULLIEN D., LIU S., LOUP C., GRIL J., THIBAUT B.
Some aspects of beech biomechanics: juvenile wood properties, sapwood pre-stress and growth forces
submitted fro recommendation to PCI Forest and wood science
2023 jun.


KIPSANAI J., WAMBUA P., NAMANGO S., AMZIANE S.
A Review on the Incorporation of Diatomaceous Earth as a Geopolymer-Based Concrete Building Resource
Materials, vol. 15, p. 71--30
2022 oct.


FUNARI M., SILVA L., SAVALLE N., LOURENÇO P.
A concurrent micro/macro FE-model optimized with a limit analysis tool for the assessment of dry-joint masonry structures
International Journal for Multiscale Computational Engineering, vol. 20, p. 20
2022


UZIELLI L., DIONISI-VICI P., RIPARBELLI L., GOLI G., MANDRON P., TOGNI M., GRIL J.
A method to assess the hygro-mechanical behaviour of original panel paintings, through in situ non-invasive continuous monitoring, to improve their conservation: a long-term study on the Mona Lisa
Journal of Cultural Heritage, vol. 58, p. 146--155
2022


BOUATTOUR Y., SAUTOU V., HMEDE R., EL OUADHI Y., GOUOT D., CHENNELL P., LAPUSTA Y., CHAPELLE F., LEMAIRE J.
A minireview on brain models simulating geometrical, physical, and biochemical properties of the human brain
Frontiers in Bioengineering and Biotechnology, vol. 10, p. 818201
2022


LOBODA V., SHEVELEVA A., CHAPELLE F., LAPUSTA Y.
A set of electrically conducting collinear cracks between two dissimilar piezoelectric materials
International Journal of Engineering Science, vol. 178, p. 103725
2022


AHMADIVALA M., BERTHELLEMY J., ORCESI A., MATTRAND C., GAYTON N., YALAMAS T.
A strategy for rib-to-deck crack propagation analysis and strengthening of orthotropic deck bridges
Engineering Failure Analysis, vol. 134, p. 106057
2022


JOVANI T., BLAYSAT B., CHANAL H., GRÉDIAC M.
Applying the Virtual Fields Method to measure during milling the through-thickness residual stress distribution in aluminum-alloy sheet material
Experimental Mechanics, vol. 1, p. 1--15
2022 oct 08


ALLAM H., DUPLAN F., AMZIANE S., BURTSCHELL Y.
Assessment of manufacturing process efficiency in the dispersion of carbon fibers in smart concrete by measuring ac impedance
cement and concrete composites, vol. 127, p. 104394
2022 dec


BARROS F., DUC E., NEDELEC J., FALK V., MARCHAL P.
Characterization of Flow Properties of Gas-Atomized Powder Alloys Used for Additive Manufacturing: Comparison between Traditional Methods and Vibrated Rheology
Particle & Particle Systems Characterization, vol. 1, p. 2100151
2022


PARIS J., CHAZOULE C., DESOLE M., BRULARD N., FOURNIER S., TROGNON L., DEVISE O.
Definition of a Model-Based Engineering Framework for the Design, Organization, and Management of Local Agri-Food Systems
Open Journal of Business and Management, vol. 10, p. 914
2022


GUENERS D., CHANAL H., BOUZGARROU B.
Design and implementation of a cable-driven parallel robot for additive manufacturing applications
Mechatronics, vol. 86, p. 102874
2022 oct


JOVANI T., CHANAL H., BLAYSAT B., GRÉDIAC M.
Direct Residual Stress Identification during Machining
Journal of Manufacturing Processes, vol. 82, p. 678--688
2022 oct


SAVALLE N., VINCENS E., HANS S., LOURENÇO P.
Dynamic Numerical Simulations of Dry-Stone Retaining Walls: Identification of the Seismic Behaviour Factor
Geosciences, vol. 12, p. 252
2022


SAVALLE N., BLANC-GONNET J., VINCENS E., HANS S.
Dynamic behaviour of drystone retaining walls: shaking table scaled-down tests
european journal of environmental and civil engineering, vol. 26, p. 21
2022 dec


CHEHADE R., CHEVALIER B., DEDECKER F., BREUL P., THOURET J.
Effect of Boulder Size on Debris Flow Impact Pressure Using a CFD-DEM Numerical Model
Geosciences, vol. 12, p. 12
2022 apr. 26


NSOUAMI V., MANFOUMBI BOUSSOUGOU N., BASTIDA-ARTEGA E., MOUTOU PITTI R.
Effects of long-term loading on Moabi wood beams in the tropical environment of Gabon: variability in properties and effects of exposure conditions on mechanical properties in 3-point bending tests
Procedia Structural Integrity, vol. 37, p. 576
2022


CHANAL H., GUICHARD A., BLAYSAT B., CARO S.
Elasto-Dynamic Modeling of an Over-Constrained Parallel Kinematic Machine Using a Beam Model
Machines, vol. 10, p. 200
2022 mar 10


SEIFEDDINE K., TOUSSAINT E., AMZIANE S.
Experimental investigation on evaporation rate for enhancing evaporative cooling of pervious pavement containing recycled rubber
bio-based building materials
2022 jan.


COLOMBO C., SAVALLE N., MEHROTRA A., FUNARI M., LOURENÇO P.
Experimental, numerical and analytical investigations of masonry corners: Influence of the horizontal pseudo-static load orientation
Construction and Building Materials, vol. 344, p. 127969
2022 aug 01


LOBODA V., SHEVELEVA A., CHAPELLE F., LAPUSTA Y.
Impact of an interface electrode charge and materials polarization to a conductive interface crack
Mechanics Research Communications, vol. 124, p. 103923
2022


ELLA M., GOLI G., IKOGOU S., GRIL J., FOURNELY E., GODI G., MOUTOU PITTI R.
Impact of mechano-sorptive loading on crack propagation of notched beams of white fir and okume
procedia structural integrity, vol. 37, p. 477
2022


REBERGUE G., BLAYSAT B., CHANAL H., DUC E.
In-situ measurement of machining part deflection with Digital Image Correlation
Measurement, vol. 187, p. 110301
2022


PHAN N., GRIL J., MOUTOU PITTI R.
Influence of the cross-linking of the cellulosic fibrillar network on the effective hygro-mechanical behavior of the wood cell wall
Acta Mechanica, vol. 233, p. 4985--5007
2022 oct. 11


SAVALLE N., LOURENCO P., MILANI G.
Joint stiffness influence on the first-order seismic capacity of dry-joint masonry structures: numerical dem investigations
applied sciences, vol. 12, p. 2108
2022 feb


PAGOLI A., CHAPELLE F., CORRALES-RAMON J., MEZOUAR Y., LAPUSTA Y.
Large-area and low-cost force/tactile capacitive sensor for soft robotic applications
Sensors, vol. 22, p. 4083
2022


NDONG BIDZO C., PAMBOU NZIENGUI C., IKOGOU S., KAISER B., MOUTOU PITTI R.
Mechanical behavior of tropical Glued Laminated Timber beams with fingers joints
Procedia Structural Integrity, vol. 37, p. 447
2022


HMEDE R., CHAPELLE F., LAPUSTA Y.
Modeling the butterfly behavior of SMA actuators using neural networks
Comptes Rendus. Mécanique, vol. 350, p. 143--157
2022


KARAMI E., BRÉMAUD I., BARDET S., ALMERAS T., GUIBAL D., LANGBOUR P., POURTAHMASI K., GRIL J.
Reversible and irreversible effects of mild thermal treatment on the properties of wood used for making musical instruments: comparing mulberry to spruce
iForest: Biogeosciences and Forestry, vol. 15, p. 256--264
2022 jul. 20


HMEDE R., CHAPELLE F., LAPUSTA Y.
Review of neural network modeling of shape memory alloys
Sensors, vol. 22, p. 5610
2022


SELLAMI A., BOUAYAD D., BENAZZOUK A., AMZIANE S., MERZOUD M.
Study of toughness and thermal properties of bio-composite reinforced with diss fibers for use as an insulating material
Energy and Buildings, vol. 276, p. 112--527
2022 dec.


CHANAL H., DUC E., CHEVALIER A.
Studying the influence of the machining process on the geometrical defects of the standardized s-shape test part
precision engineering, vol. 75, p. 193--209
2022 may


FROST M., SEDLAK P., JURY A., HELLER L.
Constitutive model for ni-ti-fe shape memory alloys
smst 2022: extended abstracts from the international
2022 may


SAVALLE N., VINCENS E., LOURENÇO P.
Pseudo-Static Analytical Model For The Static And Seismic Stability Of Dry Stone Retaining Walls
The 7th World Congress on Civil, Structural, and Environmental Engineering
2022 apr 10


JOVANI T., CHANAL H., BLAYSAT B., GRÉDIAC M.
Residual Stress Maps Determination with global Digital Image Correlation
6th CIRP Conference on Surface Integrity
2022 jun 08


OULDBOUKHITINE S., AMZIANE S., BENKHALED M.
Sensitivity study on the parameters of a hygrothermal transfer model of air, heat and mass transfer
bio-based building materials
2022 jan.


SURGET C., DUBREUIL S., MORIO J., MATTRAND C., BOURINET J., GAYTON N.
Étude de l’influence de l’échantillonnage statistique et des incertitudes d’inférence probabiliste sur la variance d’un estimateur
25ème Congrès Français de Mécanique, Nantes, 29 août - 2 septembre 2022
2022


CHANAL H., DUC E., CHEVALIER A.
Analyse de l'influence des défauts géométriques d'une machine-outil 5 axes sur le défaut géométrique de la pièce de réception en forme de S
Conference Manufacturing21
2022 oct 13


FORESTI OLIVEIRA C., BENZ-NAVARRETE M., BREUL P., CHEVALIER B.
Estimation de la réponse statique en pointe à partir d'essais dynamiques et des modèles analytiques d'interaction sol-pointe
11èmes journées nationales de géotechnique et de géologie de l’ingénieur
2022 jun. 28


MATTRAND C.
Analyse de la fiabilité en tolérance aux dommages
25ème Congrès Français de Mécanique Avancée, Nantes, 29 août - 2 septembre 2022
2022


GOLI G., MOUTOU PITTI R., GRIL J., ERIC F., GODI G.
Etude des paramètres de diffusion du bois : approche expérimentale
25e Congrès Français de Mécanique, Nantes, 29 août-2 septembre 2022
2022 aug. 29


JULES E., MATTRAND C., BOURINET J.
Health indicator learning for predictive maintenance based on a triplet loss and deep siamese network
The 8th European Congress on Computational Methods in Applied Sciences and Engineering ECCOMAS Congress 2022
2022


LEFRANC T., BONTEMPS A., GODI G., FOURNELY E., GRIL J., MOUTOU PITTI R., BEAUCHÊNE J., LAMADON T., CADOR L., ROMANA L., QUISTIN P.
Isothermes de sorption de bois guyanais en relation avec le projet Bois Duramhen 973
GRD 3544
2022 nov. 16


VAN ROOIJ A., BADEL E., BARCZI J., CARAGLIO Y., ALMERAS T., GRIL J.
Modelling the growth stress distribution during the life of tree branches: impact of different growth strategies
10th Plant Biomechanics conference
2022 aug. 22


CHIN Y., BIWOLE P., MOUTOU PITTI R., GRIL J., VIAL C., OULDBOUKHITINE S., GURCEL B.
Reduction of wood thermal conductivity by delignification
11èmes journées du GDR 3544 « Sciences du bois » - Nice, 16-18 novembre 2022
2022 nov. 16


SURGET C., DUBREUIL S., MORIO J., MATTRAND C., BOURINET J., GAYTON N.
Sensitivity analysis of statistical estimation uncertainties and probabilistic model identifcation
Journées annuelles GDR MASCOT-NUM 2022
2022


ENGONGA EDZANG C., BADEL E., MOULIA B., MOUTOU PITTI R., GRIL J.
Wind safety of rubber trees in plantations: comparison of the resistance to breakage of two clones
10th Plant Biomechanics conference
2022 aug. 22


PAGOLI A., CHAPELLE F., CORRALES-RAMON J., MEZOUAR Y., LAPUSTA Y.
A Soft Robotic Gripper With an Active Palm and Reconfigurable Fingers for Fully Dexterous In-Hand Manipulation
IEEE Robotics and Automation Letters, vol. 6, p. 7706
2021


AHMADIVALA M., MATTRAND C., GAYTON N., ORCESI A.
AK-SYS-t: New Time-Dependent Reliability Method Based on Kriging Metamodeling
ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, vol. 7, p. 1
2021


BOUKHTACHE S., BLAYSAT B., GREDIAC M., BERRY F.
Alternatives to bicubic interpolation considering fpga hardware resource consumption
ieee transactions on very large scale integration (vlsi) systems, vol. 29, p. 247
2021 feb


DELPUEYO D., JURY A., BALANDRAUD X., GREDIAC M.
Applying full-field measurement techniques for the
shape mem. superelasticity, vol. 7, p. 462
2021 dec


FROST M., JURY A., HELLER L., SEDLAK P.
Experimentally validated constitutive model for niti-based shape memory alloys featuring intermediate r-phase transformation: a case study of ni48ti49fe3
Materials & Design, vol. 203, p. 109593
2021


TAYEB A., LE CAM J., GREDIAC M., TOUSSAINT E., ROBIN E., BALANDRAUD X., CANEVET F.
Identifying hyperelastic constitutive parameters with sensitivity-based virtual fields
strain, vol. 57, p. 1--24
2021


JURY A., BALANDRAUD X., HELLER L., SITTNER P., KARLIK M.
Reconstruction of heat sources induced in superelastically
Exp. Mech., vol. 61, p. 349
2021 feb


THIBAUT B., GRIL J., CHANSON B., LOUP C., GEORGES J.
Proceedings of the 1st Plant biomechanics International conference

2021 jul.


CARRÉ M., NANTIER E., DURIEUX S., PIÉTRAC L.
Equity within Air Transportation Management – an Analysis of Inequity Index for Multi-Stakeholders Optimisation
Fourteenth USA/Europe Air Traffic Management Research and Development Seminar (ATM2021)
2021 sep


BOUFAYED R., CHAPELLE F., DESTREBECQ J., BALANDRAUD X.
Numerical and experimental analysis of the discrete workspace of a prestressed planar mechanism driven by six SMA wires
IEEEXplore ACTUATOR; International Conference and Exhibition on New Actuator Systems and Applications 2021
2021 apr


MOUTSINGA I., PACCOT F., CHANAL H., BOUTON N.
Co-manipulation robotique transparente pour l'assistance a l'examen echographique
17eme colloque national s-mart aip-primeca
2021 mar


THIBAUT B., GRIL J.
Tree growth forces and wood properties
This article has been peer-reviewed and recommended by Peer Community in Forest and Wood Sciences https://doi.org/10.24072/pci.forestwoodsci.100006
2021 jul. 31


JURY A.
Infrared calorimetry applied to thermomechanical characterization of niti alloys
universite clermont auvergne ; \v ceske vysoke u\v cen\'i technicke (prague)
2021 jun