100 publications found
2023
ACL
Geometric modeling with small defects of over-constrained Parallel Kinematic Machine
Mechanism and Machine Theory, vol. 179, p. 105120
2023 jan


Introducing Virtual DIC to Remove Interpolation Bias and Process Optimal Patterns
Experimental Mechanics, vol. 1, p. 1--17
2023 feb 14


2022
A minireview on brain models simulating geometrical, physical, and biochemical properties of the human brain
Frontiers in Bioengineering and Biotechnology, vol. 10, p. 818201
2022


A set of electrically conducting collinear cracks between two dissimilar piezoelectric materials
International Journal of Engineering Science, vol. 178, p. 103725
2022


A strategy for rib-to-deck crack propagation analysis and strengthening of orthotropic deck bridges
Engineering Failure Analysis, vol. 134, p. 106057
2022


Applying the Virtual Fields Method to measure during milling the through-thickness residual stress distribution in aluminum-alloy sheet material
Experimental Mechanics, vol. 1, p. 1--15
2022 oct 08


Assessment of manufacturing process efficiency in the dispersion of carbon fibers in smart concrete by measuring ac impedance
cement and concrete composites, vol. 127, p. 104394
2022 dec



Characterization of Flow Properties of Gas-Atomized Powder Alloys Used for Additive Manufacturing: Comparison between Traditional Methods and Vibrated Rheology
Particle & Particle Systems Characterization, vol. 1, p. 2100151
2022


Definition of a Model-Based Engineering Framework for the Design, Organization, and Management of Local Agri-Food Systems
Open Journal of Business and Management, vol. 10, p. 914
2022


Design and implementation of a cable-driven parallel robot for additive manufacturing applications
Mechatronics, vol. 86, p. 102874
2022 oct


Direct Residual Stress Identification during Machining
Journal of Manufacturing Processes, vol. 82, p. 678--688
2022 oct


Effects of long-term loading on Moabi wood beams in the tropical environment of Gabon: variability in properties and effects of exposure conditions on mechanical properties in 3-point bending tests
Procedia Structural Integrity, vol. 37, p. 576
2022


Elasto-Dynamic Modeling of an Over-Constrained Parallel Kinematic Machine Using a Beam Model
Machines, vol. 10, p. 200
2022 mar 10



Experimental investigation on evaporation rate for enhancing evaporative cooling of pervious pavement containing recycled rubber
bio-based building materials
2022 jan.

Impact of an interface electrode charge and materials polarization to a conductive interface crack
Mechanics Research Communications, vol. 124, p. 103923
2022


Impact of mechano-sorptive loading on crack propagation of notched beams of white fir and okume
procedia structural integrity, vol. 37, p. 477
2022



In-situ measurement of machining part deflection with Digital Image Correlation
Measurement, vol. 187, p. 110301
2022


Large-area and low-cost force/tactile capacitive sensor for soft robotic applications
Sensors, vol. 22, p. 4083
2022


Mechanical behavior of tropical Glued Laminated Timber beams with fingers joints
Procedia Structural Integrity, vol. 37, p. 447
2022


Modeling the butterfly behavior of SMA actuators using neural networks
Comptes Rendus. Mécanique, vol. 350, p. 143--157
2022


Review of neural network modeling of shape memory alloys
Sensors, vol. 22, p. 5610
2022


Studying the influence of the machining process on the geometrical defects of the standardized s-shape test part
precision engineering, vol. 75, p. 193--209
2022 may


ACTI
Residual Stress Maps Determination with global Digital Image Correlation
6th CIRP Conference on Surface Integrity
2022 jun 08


Sensitivity study on the parameters of a hygrothermal transfer model of air, heat and mass transfer
bio-based building materials
2022 jan.

ACTN
Analyse de l'influence des défauts géométriques d'une machine-outil 5 axes sur le défaut géométrique de la pièce de réception en forme de S
Conference Manufacturing21
2022 oct 13

2021
ACL
A 1D Model for Predicting Heat and Moisture Transfer through a Hemp-Concrete Wall Using the Finite-Element Method
Materials, vol. 14, p. 6903
2021 nov 16



A Soft Robotic Gripper With an Active Palm and Reconfigurable Fingers for Fully Dexterous In-Hand Manipulation
IEEE Robotics and Automation Letters, vol. 6, p. 7706
2021


A model-based control law for vibration reduction of serial robots with flexible joints
Mechanics & Industry, vol. 22, p. 38
2021


A review about the fluorination and oxyfluorination of carbon fibres
Journal of Fluorine Chemistry, vol. 251, p. 109887
2021


AK-SYS-t: New Time-Dependent Reliability Method Based on Kriging Metamodeling
ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, vol. 7, p. 1
2021


Alternatives to bicubic interpolation considering fpga hardware resource consumption
ieee transactions on very large scale integration (vlsi) systems, vol. 29, p. 247
2021 feb



An investigation into the long-term carbonation of vegetal concretes containing a viscosity modifying agent
Construction and Building Materials, vol. 296, p. 123765
2021 aug



CHARACTERIZATION OF LIGHTWEIGHT CONCRETE IMPREGNATED WITH CEMENT AND CAMEROONIAN CHARCOAL AS COARSE LIGHTWEIGHT AGGREGATE
International Journal of Advanced Research in Engineering and Technology, vol. 03, p. 330--365
2021 mar

Cable behavior influence on Cable-Driven Parallel Robots vibrations: experimental characterization and simulation
Journal of Mechanisms and Robotics, vol. 13, p. 1--17
2021 27


Chitosan-Based Adhesive: Optimization of Tensile Shear Strength in Dry and Wet Conditions
Polysaccharides, vol. 2, p. 110--120
2021



Concept of mechanocaloric granular material made from shape memory alloy
Energy, vol. 219, p. 119656
2021


Creep model for the long-term behaviour of combined cohesive-bridging model of frp–concrete interface debonding under axial loading
european journal of environmental and civil engineering, vol. 4, p. 1--23
2021 apr.


DIC Challenge 2.0: Developing Images and Guidelines for Evaluating Accuracy and Resolution of 2D Analyses Focus on the Metrological Efficiency Indicator
Experimental Mechanics, vol. 1, p. 1
2021

Dimensioning of partially prestressed concrete beams, optimization of T-shaped section with heels
engineering structures, vol. 235, p. 1--15
2021 may



Discrete modelling of debris flows for evaluating impacts on structures
Bulletin of Engineering Geology and the Environment, vol. 80, p. 6629
2021


Early deformation of deep brain stimulation electrodes following surgical implantation: intracranial, brain, and electrode mechanics
frontiers in bioengineering and biotechnology, vol. 9, p. 657875
2021 jun


Effect of Red Mud, Nanoclay, and Natural Fiber on Fresh and Rheological Properties of Three-Dimensional Concrete Printing
Materials Journal, vol. 118, p. 97--110
2021 nov. 01



Effect of metakaolin and natural fibres on three-dimensional printing mortar
Proceedings of the ICE - Construction Materials, vol. 174, p. 115--128
2021 jun



Experimental and nonlinear finite element analysis of shear behaviour of reinforced concrete beams
Structures, vol. 29, p. 1582--1596
2021 feb



Experimental and numerical investigation of the effect of steel fibres on the deflection behaviour of reinforced concrete beams without stirrups
Structures, vol. 33, p. 1603--1619
2021 oct



Geometrical defect identification of a SCARA robot from a vector modeling of kinematic joints invariants
Mechanism and Machine Theory, vol. 162, p. 1--16
2021


Heat transfer and energy storage performances of phase change materials encapsulated in honeycomb cells
journal of energy storage, vol. 38, p. 102507
2021 jun



Identifying hyperelastic constitutive parameters with sensitivity-based virtual fields
strain, vol. 57, p. 1--24
2021



In situ tracking of microbeads for the detection of biofilm formation
Biotechnology and Bioengineering, vol. 1, p. 1
2021



Incremental variational homogenization of elastoplastic composites with isotropic and Armstrong-Frederick type nonlinear kinematic hardening
International Journal of Solids and Structures, vol. 222, p. 111000
2021


Mechanical properties of glued-laminated timber made up of mixed tropical wood species
wood material science and engineering, vol. 1, p. 1
2021 aug



On biases in displacement estimation for image registration, with a focus on photomechanics
journal of mathematical imaging and vision, vol. 63, p. 777
2021 may



On the static behavior of nano Si02 based concrete beams resting on an elastic foundation
Computers and Concrete, vol. 27, p. 575--583
2021 jun.


Recent advances in thermophysical properties enhancement of phase change materials for thermal energy storage
solar energy materials and solar cells, vol. 231, p. 111309
2021 oct


Reconstruction of Heat Sources Induced in Superelastically Loaded Ni-Ti Wire By Localized Deformation Processes
Experimental Mechanics, vol. 61, p. 349
2021


Review of soft fluidic actuators: classification and materials modeling analysis
Smart Materials and Structures, vol. 31, p. 13001
2021


Simplified mathematical model and experimental analysis of latent thermal energy storage for concentrated solar power plants
journal of energy storage, vol. 41, p. 102871
2021 sep


Spatial Variability of Ozigo Wood Beams under Long-Term Loadings in Various Environmental Exposures
Sustainability, vol. 13, p. 5356
2021


State of the art on the mechanical properties of pervious concrete
European Journal of Environmental and Civil Engineering, vol. 11, p. 1--29
2021 nov. 29



Study of geometrical defects of free-form surface machined using neural network
Advances in Mechanical Engineering, vol. 13, p. 1
2021 nov.


Study of the Influence of Plaque Growth and Hydrostatic Properties in an Atherosclerotic Artery, for the Prevention of Arterial Wall Damage: Application to Vascular Diseases
Advances in Materials Science and Engineering, vol. 2021, p. 10
2021


The Application of Ni–Ti SMA Wires in the External Prestressing of Concrete Hollow Cylinders
Materials, vol. 14, p. 1354
2021


Tree growth forces and wood properties
Peer Community In Forest & Wood Sciences, vol. 1, p. 1
2021 nov. 30



Triaxial variation of the modulus of elasticity in the thermos-elastic field of six species of tropical woods
Wood Material Science and engineering, vol. 2021, p. 1
2021


Using IR Thermography to Analyze the Mechanical Response of a Granular Material
International Journal of Mechanical Engineering and Robotics Research, vol. 10, p. 1
2021


Using linseed oil as flax fibre coating for fibre-reinforced cementitious composite
industrial crops and products, vol. 161, p. 1--13
2021 mar.


When deep learning meets digital image correlation
optics and lasers in engineering, vol. 136, p. 106308
2021


OS
Analytical Assessment Of Creep Behaviour Of European Species In Outdoor Conditions
2 Challenges in Mechanics of Time Dependent Materials Springer
2021 jan 01


Bayesian updating of a cracking model for reinforced concrete structures subjected to static and cyclic loadings
1 Fracture, Fatigue, Failure and Damage Springer
2021 jan 01


Influence Of Fracture And Delayed Effects On Steel-Concrete Composite Structures
1 Fracture, Fatigue, Failure and Damage Evolution Springer
2021 jan 01


DO
Proceedings of the 8th Plant biomechanics International conference
2021 jun. 01

ACLN
Définition d’un cadre d’ingénierie à base de modèles pour la conception et le pilotage des systèmes agro- alimentaires de proximité
ISTE OpenScience, vol. 1, p. 1
2021

ACTI
Assessment of small-strain modulus through wave velocity measurement with dynamic penetrometer Panda 3®
6th International Conference on Geotechnical and Geophysical Site Characterization, Budapest, Hongrie, 26-29 Septembre 2021
2021 sep

BONDING PERFORMANCE OF TROPICAL MULTI SPECIES GLUED SOLID TIMBER
World Conference On Timber Engineering
2021 aug 10

CHARACTERIZATION OF THE THIGMOMORPHOGENETIC RESPONSE OF RUBBER TREE CLONE (HEVEA BRASILIENSIS) : IMPACT ON WIND BREAKAGE STRENGTH
World Conference On Timber Engineering
2021 aug. 10

Equity within Air Transportation Management – an Analysis of Inequity Index for Multi-Stakeholders Optimisation
Fourteenth USA/Europe Air Traffic Management Research and Development Seminar (ATM2021)
2021 sep

Identification of a Consensus in a Multicriteria Decision Process involving several Decision-Makers Trade-off between global benefits and local consensus for multi-hub airlines operations
11th SESAR Innovation Days 2021
2021

Influence of the particle shape on the impact force of lahar on an obstacle
Powders & Grains 2021 – 9th International Conference on Micromechanics on Granular Media
2021 jul

Numerical and experimental analysis of the discrete workspace of a prestressed planar mechanism driven by six SMA wires
IEEEXplore ACTUATOR; International Conference and Exhibition on New Actuator Systems and Applications 2021
2021 apr

VISCOELASTIC AND MECHANO-SORPTIVE BEHAVIOUR OF TWO TROPICAL SPECIES
World Conference On Timber Engineering
2021 aug. 10

ACTN
Co-manipulation robotique transparente pour l'assistance à l'examen échographique
17ème colloque national S-mart AIP-PRIMECA
2021 mar. 31

Contrôle par Supervision des Réseaux HVDC Reconfigurables
SYMPOSIUM DE GENIE ELECTRIQUE (SGE 2020)
2021 jul 06

INV
Effects of long-term loading on Moabi timber beams in the tropical environment of Gabon: spatial variability of mechanical parameters in 3- point bending and axial compression tests
4th International Conference on Structural Integrity Funchal, Madeira (Portugal), 30 août - 1 September, 2021
2021 sep

Impact of mechano-sorptive loading on crack propagation of notched beams of White-fir and Okume
4th International Conference on Structural Integrity Funchal, Madeira (Portugal), 30 août - 1 September, 2021
2021 sep

Impact of moisture content on tropical wood under opening mode
4th International Conference on Structural Integrity Funchal, Madeira (Portugal), 30 août - 1 September, 2021
2021 sep

Mechanical behavior of tropical Glued Laminated Timber (GLT) beams with fingers joints
4th International Conference on Structural Integrity Funchal, Madeira (Portugal), 30 août - 1 September, 2021
2021 sep

COM
A Soft Robotic Gripper With an Active Palm and Reconfigurable Fingers for Fully Dexterous In-Hand Manipulation
2021 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2021), Prague (Czech Republic), 27 septembre-1er octobre 2021
2021 oct

An incremental variational procedure for elasto-plastic composites with combined isotropic and kinematic hardening
25th International Congress of Theoretical and Applied Mechanics (ICTAM), August 22-27, Milano, Italy, 2021
2021 aug

Analysis of the Thermomechanical Response of a Rubber-like Granular Material
SEM Annual Conference and Exposition on Experimental and Applied Mechanics, Virtual,
2021 jun

Co-manipulation robotique transparente pour l'assistance a l'examen echographique
17eme colloque national s-mart aip-primeca
2021 mar

Design and Optimization of a Dextrous Robotic Finger
2021 IEEE International Conference on Robotics and Automation (ICRA 2021), Xi'an (Chine), 30 mai-5 juin 2021
2021 jun

Experimental and Numerical Study of Cracking and Strains of Tropical Green Wood Slice Subjected to Natural Drying
2021 SEM Annual Conference on Experimental & Applied Mechanics, Virtual or Albuquerque (USA), 14–17, jun 2021
2021 jun

Heat Source Reconstruction Applied to Fatigue Characterization Under Varying Stress Amplitude
SEM Annual Conference and Exposition on Experimental and Applied Mechanics
2021 jun

Pourquoi les branches cassent elles sans raison apparente. Le cas des charpentières plagiotropes.
24èmes Journées de l’Ecole Doctorale SVSAE
2021 may 27

Sensitivity Analysis of a Concrete Structure Subjected to Cyclic Loading Using a Polynomial Chaos Expansion Method
2021 SEM Annual Conference on Experimental & Applied Mechanics, Virtual or Albuquerque (USA), 14–17, jun 2021
2021 jun

Traitement du cancer de la prostate par plasma froid
clermont innovation week
2021 apr

AP
Tree growth forces and wood properties
This article has been peer-reviewed and recommended by Peer Community in Forest and Wood Sciences https://doi.org/10.24072/pci.forestwoodsci.100006
2021 jul. 31

2020
ACL
A dielectric breakdown model for an electrode along an interface between two piezoelectric materials
Engineering Fracture Mechanics, vol. 224, p. 106809
2020

Influence of temperature in a mass transfer simulation: application to wood
Wood Science and Technology, vol. 54, p. 943--962
2020 jul.



DO
Multifonctionnalité des forêts et diversité des usages du bois
2020

