SURGET C., DUBREUIL S., MORIO J., MATTRAND C., BOURINET J., GAYTON N.
Sensitivity to statistical estimation uncertainties and probabilistic model identification
Journées annuelles GDR MASCOT-NUM 2023
2023


AHMADIVALA M., BERTHELLEMY J., ORCESI A., MATTRAND C., GAYTON N., YALAMAS T.
A strategy for rib-to-deck crack propagation analysis and strengthening of orthotropic deck bridges
Engineering Failure Analysis, vol. 134, p. 106057
2022


SURGET C., DUBREUIL S., MORIO J., MATTRAND C., BOURINET J., GAYTON N.
Étude de l’influence de l’échantillonnage statistique et des incertitudes d’inférence probabiliste sur la variance d’un estimateur
25ème Congrès Français de Mécanique, Nantes, 29 août - 2 septembre 2022
2022


MATTRAND C.
Analyse de la fiabilité en tolérance aux dommages
25ème Congrès Français de Mécanique Avancée, Nantes, 29 août - 2 septembre 2022
2022


JULES E., MATTRAND C., BOURINET J.
Health indicator learning for predictive maintenance based on a triplet loss and deep siamese network
The 8th European Congress on Computational Methods in Applied Sciences and Engineering ECCOMAS Congress 2022
2022


SURGET C., DUBREUIL S., MORIO J., MATTRAND C., BOURINET J., GAYTON N.
Sensitivity analysis of statistical estimation uncertainties and probabilistic model identifcation
Journées annuelles GDR MASCOT-NUM 2022
2022


AHMADIVALA M., MATTRAND C., GAYTON N., ORCESI A.
AK-SYS-t: New Time-Dependent Reliability Method Based on Kriging Metamodeling
ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, vol. 7, p. 1
2021


AMZIANE S., ABEL NOUR N., VIÉ D., CHATEAUNEUF A., KALLASSY A.
Dimensioning of partially prestressed concrete beams, optimization of T-shaped section with heels
engineering structures, vol. 235, p. 1--15
2021 may


MATTRAND C., BEAUREPAIRE P., GAYTON N.
Méthodes adaptatives basées sur le krigeage pour l’évaluation de probabilités de défaillance : focus sur les méthodes AK
6 ISTE Editions ISTE Editions
2021


NOUR N., VIE D., CHATEAUNEUF A., AMZIANE S., KALLASSY A.
Dimensioning approach of partially prestressed concrete beams: optimization of t-shaped section with heels
proceedings of the 2020 session of the 13th fib international phd symposium in civil engineering
2020


HUCHET Q., MATTRAND C., BEAUREPAIRE P., RELUN N., GAYTON N.
AK-DA: An efficient method for the fatigue assessment of wind turbine structures
Wind Energy, vol. 22, p. 638--652
2019


NIYIGENA C., AMZIANE S., CHATEAUNEUF A.
Assessing the impact of calculation methods on the variability of young's modulus for hemp concrete material
construction and building materials, vol. 198, p. 332--344
2019


DEGHOUL N., ERROUANE H., SEREIR Z., CHATEAUNEUF A., AMZIANE S.
Effect of temperature on the probability and cost analysis of mixed-mode fatigue crack propagation in patched aluminium plate
international journal of adhesion and adhesives, vol. 94, p. 53--63
2019


BELAZI W., OULDBOUKHITINE S., CHATEAUNEUF A., BOUCHAIR A.
Experimental and numerical study to evaluate the effect of thermostat settings on building energetic demands during the heating and transition seasons
applied thermal engineering, vol. 152, p. 35--51
2019


GOKA E., BEAUREPAIRE P., HOMRI L., DANTAN J.
Probabilistic-based approach using kernel density estimation for gap modeling in a statistical tolerance analysis
mechanism and machine theory, vol. 139, p. 294--309
2019


GOKA E., HOMRI L., BEAUREPAIRE P., DANTAN J.
Statistical tolerance analysis of over-constrained mechanical assemblies with form defects considering contact types
journal of computing and information science in engineering, vol. 19, p. 021010--02101013
2019


PERSOONS A., BEAUREPAIRE P., CHATEAUNEUF A., BUMBIELER F.
Time-dependent reliability analysis of overpacks for high-level radioactive waste
nuclear engineering and design, vol. 352, p. 110156
2019


BEAUREPAIRE P.
Actualisation bayesienne avec des donnees experimentales reduites
24eme congres francais de mecanique
2019 aug


AMRANE C., BEAUREPAIRE P., MATTRAND C., BOURINET J., GAYTON N.
Apport de l'agregation de metamodeles pour le calcul de probabilite d'evenements rares
24eme congres francais de mecanique
2019 aug


PERSOONS A., BEAUREPAIRE P., CHATEAUNEUF A., BUMBIELER F.
Etude de fiabilite en fonction du temps de conteneurs de stockage de dechets radioactifs haute activite
24eme congres francais de mecanique
2019 aug


IDRISS D., BEAUREPAIRE P., HOMRI L., GAYTON N.
Key characteristics identification based on tolerance allocation by iso-sensitivity
24eme congres francais de mecanique
2019 aug


AHMADIVALA M., SAWICKI B., BRUHWILER E., YALAMAS T., GAYTON N., MATTRAND C., ORCESI A.
Application of Time Series Methods on Long-Term Structural Monitoring Data for Fatigue Analysis
SMAR2019 - Fifth Conference On Smart Monitoring, Assessment and Rehabilitation Of Civil Structures
2019


BEAUREPAIRE P.
Bayesian updating with reduced experimental data
29th european safety and reliability conference
2019 sep


BEYLAT D., FEAU C., CLAIR D., FOGLI M.
Experimental and numerical responses of free-standing flexible stacked structures under seismic excitations
Proceedings of Second International Conference on Natural Hazards & Infrastructure (ICONHIC 2019), Chania (Greece), June 23-26, 2019
2019 jun


IDRISS D., BEAUREPAIRE P., HOMRI L., GAYTON N.
Key characteristics identification based on tolerance allocation by iso-sensitivity
17th international probabilistic workshop
2019 sep


AMRANE C., MATTRAND C., BEAUREPAIRE P., BOURINET J., GAYTON N.
On the use of ensembles of metamodels for estimation of the failure probability
UNECOMP 2019 3rd ECCOMAS Thematic Conference on Uncertainty Quantification in Computational Sciences and Engineering
2019


AHMADIVALA M., MATTRAND C., GAYTON N., YALAMAS T., ORCESI A., CAUSSE G.
Time-variant Reliability Analysis Based on AK-SYS
13th International Conference on Applications of Statistics and Probability in Civil Engineering, ICASP13
2019


CHEVALIER L., BRUCHON J., LIOTIER P., MOULIN N., DRAPIER S., MATTRAND C., BENHACINE C.
Écoulements capillaires dans une microstructure fibreuse
14ème colloque national en calcul des structures CSMA, 13-17 mai 2019, presqu’île de Giens
2019


AHMADIVALA M., MATTRAND C., GAYTON N., DUMAS A.
Application of AK-SYS method for time-dependent reliability analysis
24ème Congrès Français de Mécanique Brest
2019


BEYLAT D., CLAIR D., FOGLI M.
Comportement expérimental et numérique de structures libres et flexibles sous séismes
Actes du 10ème Colloque National de l'Association Française de Génie Parasismique (AFPS), Strasbourg (Alsace), 24-27 sept. 2019
2019 sep


GILLE M., DUMAS A., BEAUREPAIRE P., GAYTON N., YALAMAS T.
Methode d'optimisation geometrique renvoyant le point de conception afin d'evaluer la defaillance d'un systeme en parallele
24eme congres francais de mecanique
2019 aug


PERSOONS A., BEAUREPAIRE P., CHATEAUNEUF A., BUMBIELER F.
Time-dependent reliability analysis of radioactive waste overpack in repository conditions
17th international probabilistic workshop
2019 sep


BEAUREPAIRE P.
Actualisation bayesienne avec des donnees experimentales reduites
24eme congres francais de mecanique
2019 aug


IDRISS D., BEAUREPAIRE P., HOMRI L., GAYTON N.
Analyse de sensibilite pour l’identification des cotes critiques en fabrication de grande serie
6eme journee de la conception robuste et fiable
2019


AHMADIVALA M., MATTRAND C., GAYTON N., DUMAS A.
Application of AK-SYS method for time-dependent reliability analysis
24ème Congrès Français de Mécanique Brest
2019


AHMADIVALA M., SAWICKI B., BRUHWILER E., YALAMAS T., GAYTON N., MATTRAND C., ORCESI A.
Application of Time Series Methods on Long-Term Structural Monitoring Data for Fatigue Analysis
SMAR2019 - Fifth Conference On Smart Monitoring, Assessment and Rehabilitation Of Civil Structures
2019


AMRANE C., BEAUREPAIRE P., MATTRAND C., BOURINET J., GAYTON N.
Apport de l'agregation de metamodeles pour le calcul de probabilite d'evenements rares
24eme congres francais de mecanique
2019 aug


BEAUREPAIRE P.
Bayesian updating with reduced experimental data
29th european safety and reliability conference
2019 sep


PERSOONS A., BEAUREPAIRE P., CHATEAUNEUF A., BUMBIELER F.
Etude de fiabilite en fonction du temps de conteneurs de stockage de dechets radioactifs haute activite
24eme congres francais de mecanique
2019 aug


IDRISS D., BEAUREPAIRE P., HOMRI L., GAYTON N.
Key characteristics identification based on tolerance allocation by iso-sensitivity
24eme congres francais de mecanique
2019 aug


IDRISS D., BEAUREPAIRE P., HOMRI L., GAYTON N.
Key characteristics identification based on tolerance allocation by iso-sensitivity
17th international probabilistic workshop
2019 sep


AMRANE C., MATTRAND C., BEAUREPAIRE P., BOURINET J., GAYTON N.
On the use of ensembles of metamodels for estimation of the failure probability
UNCECOMP 2019 3rd ECCOMAS Thematic Conference on Uncertainty Quantification in Computational Sciences and Engineering
2019


PERSOONS A., BEAUREPAIRE P., CHATEAUNEUF A., BUMBIELER F.
Time-dependent reliability analysis of radioactive waste overpack in repository conditions
17th international probabilistic workshop
2019 sep


AHMADIVALA M., MATTRAND C., GAYTON N., YALAMAS T., ORCESI A., CAUSSE G.
Time-variant Reliability Analysis Based on AK-SYS
13th International Conference on Applications of Statistics and Probability in Civil Engineering, ICASP13
2019


LELIEVRE N., BEAUREPAIRE P., MATTRAND C., GAYTON N.
Ak-mcsi: a kriging-based method to deal with small failure probabilities and time-consuming models
structural safety, vol. 73, p. 1--11
2018


MATHEY C., FEAU C., CLAIR D., BAILLET L., FOGLI M.
Experimental and numerical analyses of variability in the responses of imperfect slender free rigid blocks under random dynamic excitations
engineering structures, vol. 172, p. 891
2018


AMZIANE S., NIYIGENA C., CHATEAUNEUF A.
Multicriteria analysis demonstrating the impact of shiv on the properties of hemp concrete
construction and building materials, vol. 160, p. 211--222
2018 jan


MOUYEAUX A., CARVAJAL C., BRESSOLETTE P., PEYRAS L., BREUL P., BACCONNET C.
Probabilistic stability analysis of an earth dam by SFEM based on field data.
Computer and Geotechnics, vol. 101, p. 34--47
2018


TRAN T., BASTIDAS-ARTEAGA E., AOUES Y., PAMBOU NZIENGUI C., HAMDI S., MOUTOU PITTI R., FOURNELY E., SCHOEFS F., CHATEAUNEUF A.
Reliability assessment and updating of notched timber components subjected to environmental and mechanical loading
Engineering Structures, vol. 166, p. 107--116
2018


CHABRIDON V., BALESDENT M., BOURINET J., MORIO J., GAYTON N.
Reliability-based sensitivity estimators of rare event probability in the presence of distribution parameter uncertainty
Reliability Engineering & System Safety, vol. 178, p. 164--178
2018


BEAUREPAIRE P., MATTRAND C., GAYTON N., DANTAN J.
Tolerance analysis of a deformable component using the probabilistic approach and kriging-based surrogate models
asce-asme journal of risk and uncertainty in engineering systems, part a: civil engineering, vol. 4, p. 04018028
2018


ASKRI R., BOIS C., WARGNIER H., GAYTON N.
Tolerance synthesis of fastened metal-composite joints based on probabilistic and worst case approaches
Computer-Aided Design, vol. 100, p. 39--51
2018


GAYTON N., LELIEVRE N., BEAUREPAIRE P., MATTRAND C., MARGUIN V.
Les methodes ak pour l'analyse de fiabilite – etat des lieux et recents developpements
10eme journee fiabilite des materiaux et des structures, bordeaux
2018


HUCHET Q., MATTRAND C., BEAUREPAIRE P., GAYTON N., RELUN N.
A Kriging based procedure for the certification of wind turbine structures: application to large scale models
The 54thESReDA Seminar on Risk, Reliability and Safety of Energy Systems in Coastal and Marine Environments
2018


LELIEVRE N., BEAUREPAIRE P., MATTRAND C., GAYTON N., MARGUIN V.
A kriging-based method to deal with high dimensional reliability problems
ifip wg-7.5 – reliability and optimization of structural systems, zurich
2018


BEAUREPAIRE P.
Bayesian updating with time dependent models
european safety and reliability conference
2018 jun


HUCHET Q., MATTRAND C., BEAUREPAIRE P., RELUN N., GAYTON N.
Cost effective strategy using Kriging surrogates to compute fatigue at multiple locations of a structure: Application to offshore wind turbine certification
12th International Fatigue Congress (FATIGUE 2018)
2018


PERSOONS A., BEAUREPAIRE P., CHATEAUNEUF A., BUMBIELER F.
Effect of the manufacturing defects on the reliability of disposal packages for high level radioactive waste
european safety and reliability conference
2018 jun


LEGER R., MATTRAND C., MOOTI A., CORN S.
Modeling natural fiber composites microstructures for predicting their water aging
18th european conference on composites materials
2018 jun


IDRISS D., BEAUREPAIRE P., HOMRI L., GAYTON N.
Tolerance analysis - key characteristics identification by sensitivity methods
procedia cirp, vol. 75, p. 33--38
2018


CHABRIDON V., BALESDENT M., BOURINET J., MORIO J., GAYTON N.
Global sensitivity analysis of a reliability measure under a bi-level uncertainty
Proc. 10ème Journées Fiabilite des Matériaux et des Structures (JFMS 2018), Bordeaux, France, 27--28 mars 2018
2018


PERSOONS A., BEAUREPAIRE P., CHATEAUNEUF A., BUMBIELER F.
Impact des defauts de fabrication sur la fiabilite des conteneurs de stockage de dechets radioactifs de haute activite
10eme journee fiabilite des materiaux et des structures, bordeaux
2018


HUCHET Q., MATTRAND C., BEAUREPAIRE P., GAYTON N., RELUN N.
A Kriging based procedure for the certification of wind turbine structures: application to large scale models
The 54thESReDA Seminar on Risk, Reliability and Safety of Energy Systems in Coastal and Marine Environments
2018


HUCHET Q., MATTRAND C., BEAUREPAIRE P., RELUN N., GAYTON N.
Cost effective strategy using Kriging surrogates to compute fatigue at multiple locations of a structure: Application to offshore wind turbine certification
12th International Fatigue Congress (FATIGUE 2018)
2018


CHABRIDON V., BALESDENT M., BOURINET J., MORIO J., GAYTON N.
Global sensitivity analysis of a reliability measure under a bi-level uncertainty
Proc. 10ème Journées Fiabilite des Matériaux et des Structures (JFMS 2018), Bordeaux, France, 27--28 mars 2018
2018


LELIEVRE N., BEAUREPAIRE P., MATTRAND C., GAYTON N., MARGUIN V.
Nouvelles methodes basees sur le krigeage pour l'analyse de fiabilite – evenements rares et grande dimension
reunion gtr securite et surete des structures de l'institut pour la maitrise des risques
2018


GOURIOU B., BRESSOLETTE P., VIAL C.
Analysis of the variability of food texture properties: application to the fracturability of dry pet food
journal of texture studies, vol. 48, p. 586--596
2017


CHABRIDON V., BALESDENT M., BOURINET J., MORIO J., GAYTON N.
Evaluation of failure probability under parameter epistemic uncertainty: Application to aerospace system reliability assessment
Aerospace Science and Technology, vol. 69, p. 526--537
2017


GUSTAVO FERREIRA CORDEIRO S., DENNER LEONEL E., BEAUREPAIRE P.
Quantification of cohesive fracture parameters based on the coupling of bayesian updating and the boundary element method
engineering analysis with boundary elements, vol. 74, p. 49--60
2017


NIYIGENA C., AMZIANE S., CHATEAUNEUF A.
Investigating hemp concrete mechanical properties variability due to hemp particles
conference proceedings of the society for experimental mechanics series
2017


LEBRE M., ARROUK K., VO VAN A., LEBORGNE A., GRAND-BROCHIER M., BEAUREPAIRE P., VACAVANT A., MAGNIN B., ABERGEL A., CHABROT P.
Medical image processing and numerical simulation for digital hepatic parenchymal blood flow
SASHIMI Workshop in MICCAI 2017
2017


CHABRIDON V., BALESDENT M., BOURINET J., MORIO J., GAYTON N.
Reliability-based sensitivity analysis of aerospace systems under distribution parameter uncertainty using an augmented approach
Proc. 12th International Conference on Structural Safety and Reliability (ICOSSAR 2017), Vienna, Austria, August 6--10, 2017
2017


HUCHET Q., MATTRAND C., BEAUREPAIRE P., GAYTON N., RELUN N.
The help of metamodels of wind turbine certification
ICCOSAR 12th International Conference on Structural Safety & Reliability
2017


HUCHET Q., MATTRAND C., BEAUREPAIRE P., RELUN N., GAYTON N.
Approximation d’intégrales coûteuses par utilisation de métamodèles : Application à la certification en fatigue des structures éoliennes
23ème Congrès Français de Mécanique Lille
2017


MATTRAND C., CAUSSE G., YALAMAS T.
Dispersion de la résistance en fatigue : analyse comparée de différentes approches
23ème Congrès Français de Mécanique Lille
2017


LELIEVRE N., BEAUREPAIRE P., MATTRAND C., GAYTON N.
La famille des methodes ak pour l’analyse defiabilite : synthese des recentes avancees
23eme congres francais de mecanique
2017


HUCHET Q., MATTRAND C., BEAUREPAIRE P., RELUN N., GAYTON N.
Approximation d’intégrales coûteuses par utilisation de métamodèles : Application à la certification en fatigue des structures éoliennes
23ème Congrès Français de Mécanique Lille
2017


MATTRAND C., CAUSSE G., YALAMAS T.
Dispersion de la résistance en fatigue : analyse comparée de différentes approches
23ème Congrès Français de Mécanique Lille
2017


LELIEVRE N., BEAUREPAIRE P., MATTRAND C., GAYTON N.
La famille des methodes ak pour l’analyse defiabilite : synthese des recentes avancees
23eme congres francais de mecanique
2017


MATTRAND C., CORN S., LEGER R., MOOTI A.
Modélisation de la microstructure de composites UD à fibres naturelles pour l’étude de leur durabilité
EcoMat2017
2017


CHABRIDON V., BALESDENT M., BOURINET J., MORIO J., GAYTON N.
Reliability-based sensitivity analysis of aerospace systems under distribution parameter uncertainty using an augmented approach
Proc. 12th International Conference on Structural Safety and Reliability (ICOSSAR 2017), Vienna, Austria, August 6--10, 2017
2017


HUCHET Q., MATTRAND C., BEAUREPAIRE P., GAYTON N., RELUN N.
The help of metamodels of wind turbine certification
ICCOSAR 12th International Conference on Structural Safety & Reliability
2017


SALLIN M., CLAIR D., BOURINET J., FOGLI M.
Uncertainty propagation in nonlinear dynamics of ground military vehicles
2nd International Conference on Uncertainty Quantification in Computational Sciences and Engineering (UNCECOMP 2017), Rhodes Island, Greece, September 18--20, 2017
2017


MATHEY C., FEAU C., POLITOPOULOS I., CLAIR D., BAILLET L., FOGLI M.
Behavior of rigid blocks with geometrical defects under seismic motion: an experimental and numerical study
earthquake engineering \& structural dynamics, vol. 45, p. 2455
2016


FAURIAT W., MATTRAND C., GAYTON N., BEAKOU A., CEMBRYNSKI T.
Estimation of road profiles variability from measured vehicle response
Vehicle system dynamics, vol. 54, p. 585--605
2016


LELIEVRE N., BEAUREPAIRE P., MATTRAND C., GAYTON N., OTSMANE A.
On the consideration of uncertainty in design: optimization - reliability - robustness
structural and multidisciplinary optimization, vol. 54, p. 1423--1437
2016 dec 01


AISSANI A., CHATEAUNEUF A., FONTAINE J., AUDEBERT P.
Quantification of workmanship insulation defects and their impact on the thermal performance of building facades.
Applied Energy, vol. 165, p. 272--284
2016


KOUASSI A., BOURINET J., LALLECHERE S., BONNET P., FOGLI M.
Reliability and sensitivity analysis of transmission lines in a probabilistic EMC context
Electromagnetic Compatibility, IEEE Transactions on, vol. 58, p. 561--572
2016


NIYIGENA C., AMZIANE S., CHATEAUNEUF A., ARNAUD L., BESSETTE L., COLLET F., LANOS C., ESCADEILLAS G., LAWRENCE M., MAGNIONT C., MARCEAU S., PAVIA S., PETER U., PICANDET V., SONEBI M., WALKER P.
Variability of the mechanical properties of hemp concrete
materials today communications, vol. 7, p. 122--133
2016


LELIEVRE N., BEAUREPAIRE P., MATTRAND C., GAYTON N.
On the consideration of uncertainty in design: optimization - reliability - robustness
vii european congress on computational methods in applied sciences and engineering
2016


ANTHONY M., CARVAJAL C., PEYRAS L., BRESSOLETTE P., BACCONNET C., BREUL P.
Probabilistic evaluation of the reliability of an embankment dam with respect to sliding based on construction data
10th Icold European Club Symposium 25-30 Octobre 2016 ANTALYA Turquie
2016


LELIEVRE N., BEAUREPAIRE P., MATTRAND C., GAYTON N.
On the consideration of uncertainty in design: optimization - reliability - robustness
vii european congress on computational methods in applied sciences and engineering
2016


GOURIOU B., BRESSOLETTE P., VIAL C.
Étude probabiliste des propriétés de texture d'un produit alimentaire
9èmes Journées Fiabilité Matériaux Structures JFMS (Nancy, France)
2016 apr.


OTSMANE O., MARGUIN V., GAYTON N.
Method for determining tolerance intervals for dimensioning a part

2016


MATTRAND C., BEAKOU A., CHARLET K.
Fourier based methodology for simulating 2D-random shapes in heterogeneous materials
Computational Mechanics, vol. 56, p. 371--388
2015


FAURIAT W., MATTRAND C., GAYTON N., BEAKOU A.
An application of stochastic simulation of the study of the variability of road induced fatigue loads
Procedia Engineering, 6th Fatigue Design conference
2015


MATHEY C., FEAU C., CLAIR D., BAILLET L., FOGLI M.
Experimental and numerical response of rigid slender blocks with geometrical defects under seismic excitation
Proceedings of EVACES'15 - Experimental Vibration Analysis for Civil Engineering Structures, Zurich (Switzerland), CDRom (8p.), October 19-21, 2015
2015 oct


MATHEY C., CLAIR D., BAILLET L., FOGLI M.
Experimental and numerical investigation on the response of rigid slender blocks with geometrical defects under seismic excitation
Proceedings of French-Japanese Symposium on Earthquakes and Triggered Hazards, Orléans (France), September 16-19, 2015
2015 sep


AISSANI A., CHATEAUNEUF A., FONTAINE J., AUDEBERT P.
Reliability based design optimization of insulation systems considering climate change and workmanship uncertainties
Proceedings of the 12th International Conference on Applications of Statistics and Probability in Civil Engineering (ICASP 12).
2015


FAURIAT W., MATTRAND C., GAYTON N., BEAKOU A.
An application of stochastic simulation of the study of the variability of road induced fatigue loads
Procedia Engineering, 6th Fatigue Design conference
2015