BACCOMO A., CHANAL H., DUC E.
Etude du comportement cinématique d'un robot lors de la fabrication d'une tubulure avec les procédés WAAM
Manufacturing'21
2024 jun 05


BARROS F., DUC E., NEDELEC J., FALK V., MARCHAL P.
Characterization of Flow Properties of Gas-Atomized Powder Alloys Used for Additive Manufacturing: Comparison between Traditional Methods and Vibrated Rheology
Particle & Particle Systems Characterization, vol. 1, p. 2100151
2022


REBERGUE G., BLAYSAT B., CHANAL H., DUC E.
In-situ measurement of machining part deflection with Digital Image Correlation
Measurement, vol. 187, p. 110301
2022


CHANAL H., DUC E., CHEVALIER A.
Studying the influence of the machining process on the geometrical defects of the standardized s-shape test part
precision engineering, vol. 75, p. 193--209
2022 may


CHANAL H., DUC E., CHEVALIER A.
Analyse de l'influence des défauts géométriques d'une machine-outil 5 axes sur le défaut géométrique de la pièce de réception en forme de S
Conference Manufacturing21
2022 oct 13


DOUELLOU C., GRAVIER A., BALANDRAUD X., DUC E.
Heat Source Reconstruction Applied to Fatigue Characterization Under Varying Stress Amplitude
SEM Annual Conference and Exposition on Experimental and Applied Mechanics
2021 jun


FORTUNET C., DURIEUX S., CHANAL H., DUC E.
Multicriteria decision optimization for the design and manufacture of structural aircraft parts
International Journal for Interactive Design and Manufacturing (IJIDeM), vol. 14, p. 1015--1030
2020


DOUELLOU C., BALANDRAUD X., DUC E.
Assessment of geometrical defects due to thermal distortions in laser-beam-melting additive manufacturing: a simulation approach
Rapid Prototyping Journal, vol. 25, p. 939--950
2019


ANTOMARCHI A., DURIEUX S., DUC E.
Impact de la fabrication additive sur la supply chain : état des lieux et diagnostics
Logistique & Management, vol. 1, p. 1--19
2019


LAJILI M., CHANAL H., BOUZGARROU C., DUC E.
A New Approach for Machine-Tool Architecture Selection at Preliminary Design Stage
International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing (JCM 2018)
2019 apr 28


LAJILI M., CHANAL H., BOUZGARROU B., DUC E.
A new approach for machine-tool architecture selection at preliminary design stage
International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing
2019 jan 01


ANTOMARCHI A., GUILLAUME R., DURIEUX S., THIERRY C., DUC E.
Capacity planning in additive manufacturing
9th IFAC Triannual Conference on Manufacturing Modeling, Management and Control 2019, Berlin, Allemagne.
2019


DOUELLOU C., BALANDRAUD X., DUC E.
Fatigue characterization of 3d-printed maraging steel by infrared thermography
conference proceedings of the society for experimental mechanics series Mechanics of Additive and Advanced Manufacturing, Volume 8
2019


REBERGUE G., SALAS R., RAMBAUD P., BLAYSAT B., CHANAL H., DURIEUX S., MOCELLIN K., DUC E.
Processus d'usinage de Pièces Aéronautique - Simulations et Observation
14ème Colloque National en Calcul de Structures (CSMA 2019)
2019 may 13


GUTIERREZ J., CHANAL H., DURIEUX S., DUC E.
Adaptation of the geometric model of a 6 dof serial robot to the task space
mechanisms and machine science, vol. 50, p. 569--576
2018


REBERGUE G., BLAYSAT B., CHANAL H., DUC E.
Advanced DIC for accurate part deflection measurement in a machining environment
Journal of Manufacturing Processes, vol. 33, p. 10--23
2018


FORTUNET C., DURIEUX S., CHANAL H., DUC E.
DFM method for aircraft structural parts using the AHP method
Journal of Advanced Manufacturing Technology, vol. 95, p. 397--408
2018


., KISWANTO G., ISTIYANTO J., DUC E.
Implementation of analytical boundary simulation method for cutting force prediction model in five axis milling
Machining Science and Technology, vol. 22, p. 163--179
2018


LAJILI M., CHANAL H., BOUZGARROU B., DUC E.
A new approach for machine-tool architecture selection at preliminary design stage
JCM 2018
2018


REBERGUE G., BLAYSAT B., CHANAL H., DUC E.
Dedicated Global DIC to study the global behavior of a workpiece during its milling
Photomechanics
2018


ANTOMARCHI A., DURIEUX S., DUC E.
Scheduling in additive manufacturing
MOSIM, Toulouse, France.
2018


IBARBOURE S., BOTTECCHIA S., DUC E., COUTURE N.
Introduction de la realite augmentee pour une mise en œuvre plus flexible de la fabrication additive
journees de la realite virtuelle (jrv 2018)
2018 oct


REBERGUE G., BLAYSAT B., CHANAL H., DUC E.
Mesure par DIC de la déformation des pièces durant leur usinage
MUGV & Manufacturing 21
2018


DOUELLOU C., BALANDRAUD X., DUC E.
Fatigue analysis of a 3D-printed maraging steel by infrared thermography
International conference on full-field measurement techniques and their applications in experimental solid mechanics, Photomechanics 2018, Toulouse, Mar. 2018
2018


CERUTTI X., MOCELLIN K., HASSINI S., BLAYSAT B., DUC E.
Methodology for aluminium part machining quality improvement considering mechanical properties and process conditions
cirp journal of manufacturing science and technology, vol. 18, p. 18--38
2017


CHARDON G., CHANAL H., DUC E., GARNIER T.
Study of surface finish of fiber-reinforced composite molds
proceedings of the institution of mechanical engineers, part b: journal of engineering manufacture, vol. 231, p. 576--587
2017


HENDRIKO H., AKHYAN A., KISWANTO G., DUC E.
The effect of tool orientation to cut geometry in five-axis milling using analytical boundary simulation
key engineering materials, vol. 719, p. 149--153
2017


GUTIERREZ TAPIA J., CHANAL H., DURIEUX S., DUC E.
Adaptation of the geometric model of a 6 dof serial robot to the task space, computational kinematics
7th iftomm international workshop on computational kinematics
2017 may


REBERGUE G., BLAYSAT B., CHANAL H., DUC E.
Dic in machining environment, constraints and benefits
conference proceedings of the society for experimental mechanics series
2017


REBERGUE G., BLAYSAT B., CHANAL H., DUC E.
Robust characterization of the workpiece distortion during its milling thanks to Global DIC
annual conference of the international digital image correlation society
2017 nov 06


LAJILI M., CHANAL H., BOUZGARROU B., DUC E.
Méthodologie de choix d’une architecture de machine-outil 5 axes pour l’usinage du titane
23ème Congrès Français de Mécanique
2017 aug 28


CHANAL H., ARROUK K., GUTIERREZ TAPIA J., DURIEUX S., DUC E.
Provet 4.0 : projet erasmus+ pour la creation de support de cours sur l'industrie du futur
15e colloque national aip-primeca
2017 apr


PRAT D., FROMENTIN G., POULACHON G., DUC E.
Modeling and analysis of five-axis milling configurations and titanium alloy surface topography
journal of manufacturing science and engineering, transactions of the asme, vol. 138, p. 0--0
2016


WAGNER V., VISSIO A., DUC E., PIJOLAT M.
Relationship between cutting conditions and chips morphology during milling of aluminium al-2050
international journal of advanced manufacturing technology, vol. 82, p. 1881--1897
2016


KISWANTO G., HENDRIKO H., DUC E.
A hybrid analytical- and discrete-based methodology for determining cutter-workpiece engagement in five-axis milling
international journal of advanced manufacturing technology, vol. 80, p. 2083--2096
2015


TROUVAIN G., GAGNOL V., DUC E., SANCHO J.
Mass-spring parameters definition in 2d for simulation
22nd international conference in central europe on computer graphics, visualization and computer vision, wscg 2014, communication papers proceedings - in co-operation with eurographics association
2015


KISWANTO G., HENDRIKO H., DUC E.
An analytical method for obtaining cutter workpiece engagement during a semi-finish in five-axis milling
cad computer aided design, vol. 55, p. 81--93
2014


KISWANTO G., ., DUC E.
Analytical method for obtaining cut geometry of helical toroidal cutter during semi-finish in 5-axis milling
applied mechanics and materials, vol. 541, p. 780--784
2014


CERUTTI X., HASSINI S., DUC E., MOCELLIN K.
Prediction of the distortions caused by the redistribution of the residual stresses during machining using fem
materials science forum, vol. 768, p. 398--405
2014


WAGNER V., DUC E.
Study of ti-1023 milling with toroidal tool
international journal of advanced manufacturing technology, vol. 75, p. 1473--1491
2014


HENDRIKO O., DUC E., KISWANTO G.
Analytical method for obtaining cutter workpiece engagement in five-axis milling. part 3: flat-end cutter and free-form workpiece surface
lecture notes in mechanical engineering, vol. 7, p. 705--716
2013


PATELOUP S., CHANAL H., DUC E.
Process parameter definition with respect to the behaviour of complex kinematic machine tools
international journal of advanced manufacturing technology, vol. 69, p. 1233--1248
2013


BEAUCAIRE P., GAYTON N., DUC E., DANTAN J.
Statistical tolerance analysis of over-constrained mechanisms with gaps using system reliability methods
cad computer aided design, vol. 45, p. 1547--1555
2013


., DUC E., KISWANTO G.
Analytical cut geometry prediction for free form surface during semi-finish milling
asme 2013 international manufacturing science and engineering conference collocated with the 41st north american manufacturing research conference, msec 2013
2013


BEAUCAIRE P., GAYTON N., DUC E., DANTAN J.
Statistical tolerance analysis of a mechanism with gaps based on system reliability methods
procedia cirp
2013


CHAVES-JACOB J., POULACHON G., DUC E.
Optimal strategy for finishing impeller blades using 5-axis machining
international journal of advanced manufacturing technology, vol. 58, p. 573--583
2012


PATELOUP S., CHANAL H., DUC E.
Process definition of preformed part machining for taking benefit of parallel kinematic machine tool kinematic performances
international journal of advanced manufacturing technology, vol. 58, p. 869--883
2012


CHANAL H., PACCOT F., DUC E.
Sensitivity analysis of an overconstrained parallel structure machine tool, the tripteor x7
applied mechanics and materials, vol. 162, p. 394--402
2012


BEAUCAIRE P., GAYTON N., DUC E., LEMAIRE M., DANTAN J.
Statistical tolerance analysis of a hyperstatic mechanism, using system reliability methods
computers and industrial engineering, vol. 63, p. 1118--1127
2012


PRAT D., FROMENTIN G., POULACHON G., DUC E.
Experimental analysis and geometrical modeling of cutting conditions effect in 5 axis milling with ti6al4v alloy
procedia cirp
2012


PATELOUP S., CHANAL H., DUC E.
A study of the performances of parallel and serial 5 axis machine-tools for aeronautics part machining [itude des performances de machines-outils 5 axes a structure parallele et serielle pour l'usinage d'une piece aeronautique]
mecanique et industries, vol. 12, p. 479--486
2011


GAYTON N., BEAUCAIRE P., BOURINET J., DUC E., LEMAIRE M., GAUVRIT L.
Apta: advanced probability-based tolerance analysis of products
mecanique et industries, vol. 12, p. 71--85
2011


CHAVES-JACOB J., POULACHON G., DUC E., GEFFROY C.
Design for manufacturing applied to turbomachine components
international journal of advanced manufacturing technology, vol. 57, p. 453--463
2011


BRETEAU T., DAMAY T., DUC E., HASCOET J.
Design for manufacturing with tool paths adapted to marine propeller
international journal on interactive design and manufacturing, vol. 5, p. 271--275
2011


DEBOUT P., CHANAL H., DUC E.
Tool path smoothing of a redundant machine: application to automated fiber placement
cad computer aided design, vol. 43, p. 122--132
2011


PATELOUP V., CHANAL H., DUC E., RAY P.
HSM Pocketing tool path evaluation proposition of performance criteria
International Journal of Machining and Machinability of Materials, vol. 2, p. 206--221
2007


PATELOUP V., CHANAL H., DUC E., RAY P.
HSM adapted tool path calculation, for pocketing
Machining Science and Technology, vol. 10, p. 181--196
2006


TOURNIER C., DUC E.
Iso-scallop tool path generation in 5-axis milling
international journal of advanced manufacturing technology, vol. 25, p. 867--875
2005


TOURNIER C., DUC E.
Generation de trajectoires outils a hauteur de crete constante en fraisage a 5 axes
colloque nation aip-primeca
2003 mar


TOURNIER C., DUC E.
Strategies d'usinage et productivite en fraisage des surfaces complexes
16eme congres francais de mecanique
2003 sep


TOURNIER C., DUC E.
A surface based approach for constant scallop height tool path generation
international journal of advanced manufacturing technology, vol. 19, p. 318--324
2002